Software
Houzz Logo Print
sorka_gw

Brass or Bronze backflow preventer?

19 years ago

My Febco 765 1.5" pressure vacuum backflow preventer froze because I was a dumb- and didn't drain it for the winter. The Febco is brass. The connecting pipes are galvanized(at the well head) for a few feet before it turns into 1.5" PVC under ground(about 18" down for the sprinkler system).

There's a plumbing supply place that has Buckner bronze PVBs that look nearly identical to the brass Febcos. I checked around online and the Buckners retail for about $100 more than the Febcos but the Buckners are much cheaper on ebay. This place is selling brand new ones for $80. The Febco that I have can be also be found on ebay for about $100 more.

Is there any disadvantage with going with the bronze? I hear bronze might have a small quantity of lead, but no more than the solder used to put my copper pipes together. Besides, the PVB valve only has irrigation water going through it anyways.

Comments (3)