Software
Houzz Logo Print
mym2222

Convert a 2nd level deck into a concrete deck/patio

18 years ago

I have posted my question to another thread that was started several years ago, and thought I really should have started a new one.

My deck is two stories high (about 10'), it has south and west exposure that equates to 8 hrs of sun. Which also means we need to spend money quite frequently to maintain it. Right now I need to have it rebuild. I need your assistance to see if I can convert this deck into a concrete deck? huge balcony? high patio?(Not sure what is the correct term).

I am not able to find anything on the internet, most frustrating! There are info for above ground deck for pool, building a deck over a patio, or anything there is a mention of patio it is always on the first floor.

Before this I have decided on using composites material. I searched on the internet one last time before the project starts, and I have found comments from people that have stopped me in the track. It seems it is not a good alternatives. It is LESS maintenance, not NO maintenance. Unlike wood deck when the wood deck gets old it could be repainted and restain to look new. When the composite deck gets old, it will stay looking old and beat up. So what is the point of spending so much more money on having a composite deck and still have it repainted, to start the whole maintenance cycle again? Also there is the issue of getting moldy if I install the under deck covering. Since this deck is on the 2nd story and I like to use the area under deck it is something I am planning on doing.

Hope I am not alone here?!!!

Comments (9)

  • 18 years ago

    Most of the time a slab that high up will cost at least double the money.This project would require an outfit that knew what they are doing. There is a Guy over here I double up with sometimes we both bid a 16 x 50' 11' high walk out basement job latley. His price with steel rail/sprial staircase was around $44,000.

    I could not agree more with you far as a lot of composite decking material goes. John

  • 18 years ago

    Appreciate the info. So it seems it is do-able thing to do this. What is the correct term for this?

    The guy that is rebuilding the deck quoted me $1,200 for labor, and composite material is about $2,500. So it seems it will be double that.

    Is this something this handy man can do or needs a 'specialty' company to install?

  • 18 years ago

    As you drive by a Comm building going up thats what we are talking about, Grade creet beams,steel posts I beams and truses. Creet placed over base.

    A handy man can defently not do that.

    J.

  • 18 years ago

    I'm currently building a house, and considering the same thing. The big problem I'm having is that it isn't commononly done, and so it has been hard to find someone that would be able/willing without spending way too much.

    I ran across a 'hybrid' alternative, and am thinking about it:
    http://www.dekstone.com/brochure_deckstone.htm

    Dekstone uses a more conventional PT frame, but the deck itself is concrete 'tiles'.

    In my current neighborhood a nearby house has an elevated concrete patio, and it is very nice. Please post what you end up doing.....

    Here is a link that might be useful: Dekstone

  • 18 years ago

    You could also look into Miracote or Miraflex. I tore my old second floor cedar deck down and rebuilt it. I did all the framing and just had a contractor do the coating. I absolutely love it and it gave me a waterproof sun room underneath.

    The deck is framed and then sheeted with 3/4" T&G marine grade plywood. Then mesh is stapled on. Then 14 coats of various materials including mortar, waterproof membrane, and the Miraflex are applied followed by multiple coats of sealer. You can choose the pattern or color you want, mine just happens to resemble leather (I couldn't figure out how to spell naugahide :-)

    Here is a link that might be useful: {{!gwi}}

  • 7 years ago

    We have a second level wrap around deck and are also considering non wood and gapless options. What did you end up doing for your deck? Would love to know.

  • 6 years ago

    I think you need to consult with a Structural Engineer. I don't think you should attempt to build what you are talkng about for a few thousand dollars.

  • 6 years ago

    I'm currently building a second story deck and you are right there're not too many choices when it comes a permanent material that requires little upkeep.

    in the past I have done a porch deck that I wanted to incorporate into a set of concrete stairs. So I begun with a strong support 3''x4" than, 3/4" plywood with tar roofing, than I place Dimond expanded metal with pea gravel concrete six sac mix, doe to a limited space the concrete deck could only be 1''to 1 1/2" after 7 to 8 years, the deck did not show signs of cracking. Now I'm trying it in a large scale ( 2400 sf area which I'll be posting on YouTube I want to try different underlayment materials but basically the same process.