Software
Houzz Logo Print
debbeeanne

Bad Concrete Decking Job--Help

19 years ago

We used exposed aggregate concrete with natural flagstones scattered through it for our pool decking. The problem is that too much concrete was taken off in many places, making the deck very rough. It feels like you are walking on gravel, and it is almost impossible to walk barefooted on it. We thought it might even out some when it was sealed, but it didn't. So we need to find a fix.

I talked with someone from Increte products (he has not be out to the house yet), and they have a spray on product that will basically cover up the aggregate, but it will not bond to the flagstone. Also, he says they will have to do some type of blasting to the surface to get the sealer off, hopefully leaving a good surace to bond the new product. I also am worried about too much thickness in another surface which will affect drainage around the pool.

I would really like some sort of clear product that would leave the look of the aggregate, but fill in the deeper places.

Does anyone have any experience with something like this or have any ideas? We have already had a large chunk of this jackhammered up and repoured, but it didn't look much better.

Help!