Software
Houzz Logo Print
ruby22_gw

level 2 granite pricing

14 years ago

So, we live in the Denver/Boulder area. I have been getting so many quotes for granite. Pricing has varied by 2 to 3,000. I am wondering what I should expect to pay (approximately) per square foot for a good granite fabrication and install. It is very confusing! Thank you.

ruby22

Comments (14)

  • 14 years ago

    50 to 60 dollars per square foot around here.

  • 14 years ago

    I have heard that a good price is 50 to 60 per square foot from a few sources as well, but I agree gardenpixie, most of the places that I have gotten quotes from are 70 or more. We live in Lyons, so I have spoken mostly to places in Longmont and Boulder. I have been to the Stone Collection in Denver, which seems to be the place that most contractors use....huge selection, though and it is a little overwhelming if you don't have an idea what you want (I have narrowed it down now), so I need to go back. They don't fabricate or contract any of the work....just sell slabs to your contractor, but I might call and see if they have recommendations. Anyway, I guess I am going to keep asking for quotes and see what I can get.

  • 14 years ago

    We're in central NC. At our local granite place, we were quoted ~$40 sqft for Level 1 and ~$60 sq ft for Level 2. So about a $20 difference as you went up in Level. Any edge other than a straight one was an upcharge.

  • 14 years ago

    There are stone yards in Fort Collins as well. That is where the fabricator got my quote from. I had hoped the Denver ones would be less expensive. Sigh. I am seriously over budget already. I'll let you know if I find something better.

    Which granite do you like specifically? Or are you open to ideas? Dark or light?

    My kitchen is small and has a north facing window, so I would really like to have something light in there.

    Good luck, Ruby.

  • 14 years ago

    @gardenpixie Bianco Romano with standard edge (including bullnose) should not cost you more than $55-60 installed.

    Most level 2 granite installed including standard edge will be in the $50-60 range.

    Im not a fan of promoting my company publicly. As it is frowned upon here. If you need a quote, private message me and I will send details.

  • 14 years ago

    Colorado roots, I would like to e-mail you privately as well if that is ok for a quote on a level 2 granite with standard edges. I checked your profile page, and it wouldn't let me send you an e-mail. My profile is open to private email, so you could send me a message with your info. Thanks. Ruby22

  • 14 years ago

    In socal it starts at about $30 installed (they probably use prefab). Otherwise my calculation is like this
    $X per sq ft for material + $30 per sq ft for fabrication and installation.
    So if you get an entry level stone like ubatuba it should be about $40 per sqft.
    Blue and green stones run $50 and above for material alone so total would be $80 and above.

  • 14 years ago

    Coloradoroots, how do we contact you?

  • 14 years ago

    I'm in Colorado too! I have only been to the stone yard in Fort Collins but was planning on checking out the stone collection in Denver too. Ruby keep us posted!

  • 14 years ago

    gardenpixie, If you are interested, I have been busy pricing countertops. I have found a couple of "really cheap" places in Denver, but when I spoke to them and read online reviews, they were a little sketchy and I just didn't feel that great about it. The best luck as far as high ratings and price was actually in Boulder. A place called Moro's fabrication. They use multiple different stone yards, so very large selection. Price was about $1000 less than the majority of the quotes....not the very cheapest, but I have heard that there are some very "sketchy" granite fabricators out there so it pays to be careful. Also, if you are interested in cabs and pricing, we found a great custom cabinetry place in Loveland called Tharp cabinets. The price was really good, and they have an online deal right now for free install....the only cheaper prices I have found have been on RTA cabinets to be honest.....meaning less quality and more work on our part. Hope all my research helps someone! Thanks.

  • 14 years ago

    Ruby22, does Moro's fabrication have remnants? I'm looking for granite for a bathroom renovation, but only around 12-15 square feet worth.

    Thanks.

  • 14 years ago

    I am in the Denver area, a few years ago I had Santa Cecelia installed for about $34/ft, the kitchen was about 92 sq feet. I used Colorado Marble and Granite. Do call around I had quotes ranging from 8K to 3,200. I have gotten remnant bathroom counters from Luxury Stone in Englewood in my new house, for around $30/ft plus $100 for an undermount sink. I'd get quotes from both of those fabricators for your kitchen if they travel to your location.

  • 14 years ago

    Hmmmmmmm...... Got three quotes for my bathroom vanity and shower curb project, approximately 17 square feet in total. $70 to $100 a square foot for Venetian Gold or Brown and Tan.

    Much higher than I expected!

Sponsored
Bella Casa LLC
Average rating: 5 out of 5 stars17 Reviews
The Leading Interior Design Studio in Franklin County