Software
Houzz Logo Print
boysrus2

Questions - SS Countertops

18 years ago

Hi, my granite fabricator warned me that my granite slab might be just shy of the size I need to do my whole kitchen. Buying a 2nd slab will bust my budget. My solution is to put stainless steel countertops on either side of my ss rangetop. It's a 12 x 24 inch counter on either side of the rangetop. One side will be boxed in by a floor to ceiling pantry, the other by the double wall ovens, so the ss countertop only needs to be finished on the front edge.

Has anyone mixed granite and ss countertops? Do you like it? Anything I should be looking for, grade of stainless, etc...? What about the front edge - 1" or should it be more?

Have not investigated this option until today, so I know nothing. I'm grateful for any input!

Comments (14)

  • PRO
    18 years ago

    I think it'll look terrific.
    You won't even have the SS touching the granite, so there's not even a concern about the joint looking funny. Plus, a good SS fabricator can match the edge shape of your rangetop so that it looks like it's meant to be.

  • 18 years ago

    Based on feedback on this forum, I'd suggest the most important thing to know up front is how you'd feel about scratching up the shiny surface. Stainless is a magnificent countertop when treated as the fuctional workhorse it is and expected to develop a patina of wear but too often a disaster for those who want it to stay looking new and untouched. It definitely won't under normal conditions, although some people do commit to whatever's required to keep it pristine, but it'll last forever and work just as well 50 years down the road as new.

    I agree that what you're considering would add a very nice touch and look really good.

  • 18 years ago

    I love our SS counters on each side of our rangetop. We have very thick (2 1/4") counters, so had them made to match by a sheet metal shop. I think ours are 16 or 18 gauge. We have laminate on the other perimeter counters, and will soon have wood on our island. I think it would look even better with granite.

  • 18 years ago

    You should check with other granite places - there are some who charge by the actual sq. ft. used - not by the slab.

  • 18 years ago

    I was interested in stainless for my perimeter counters, and granite for the island. I was amazed to find that stainless was as expensive as granite, at least where I looked. I think it's a great combo, but check out pricing first.

  • 18 years ago

    Our stainless counter was $17/sq ft...

  • 18 years ago

    We have stainless steel countertops on our perimeter counters that flank our range. Our SS cleanup sink is welded to the countertop, making it completely integrated. Our island has granite & so does our coffee bar. We love the look & its so practical.

  • 18 years ago

    Thanks rosie about the suggestion for matching the edge shape to the rangetop. I didn't even realize that could be done! I'm ok with the finish getting a patina or light scratches too.

    Thanks to rhome410 for the sheet metal shop suggestion. I was going to call a restaurant supply shop, but the local sheet metal shop makes more sense. Yours sound fantastic. Besides asking for 16/18 ga, did you specify a grade of stainless?

    Weissman, good point. I did ask the granite fabricator to be charged per sq ft used. He said that he could have if I had picked a consistent patterned "builder favorite" granite. He said my choice is an exotic, and he was doubtful he could use the excess for another job. Am I getting a tall tale?

    Thanks so much!

  • 18 years ago

    Wow gizmonoke! Your kitchen belongs on the cover of a magazine! Any doubt I had about ss is gone.
    Did you order a special thickness as did rhome 410 or a special grade of ss? Were the side edges that butt up so perfectly to your range finished in any special way? Did you have to specify a measurement for the overhang?

    Really enjoyed your pictures!!!

  • 18 years ago

    We went with what the sheet metal guy (who was also our HVAC guy) recommended, as he'd done them before. I think it was here that someone recommended 16 gauge, but he recommended 18, which seems perfectly fine to me. The thickness (of the counter, not the steel) was determined by the counter top material/substrate...3 layers of 3/4". The stainless was then wrapped onto/over it at the shop.

  • 18 years ago

    you're not getting any bad info from your granite fabricator. some of them have big yards of slabs and charge by the sq ft because they can sell the other pieces, but many buy the slabs from yards themselfs and when it comes to the exotics, they charge by the slab because they just cant use that other smaller piece.

    were mixing granite (thunder wave) and ss. i would suggest seeing a metal fabricator verses a restaurant supply. they'll make you exactly what you need. i'm doing a marine edge, which is an edge slightly raised on the counter side to catch water and messes within the counters instead of letting it drip on the floor. perfect for a workhorse counter like ours. we'll have a welded in sink, raised countertop area behind a corner sink, and a built in drain board. you can do anything with stainless!

    we're having our counters pre polished with millions of scratch marks so we'll begin with a nice patina :) 16 guage is the recommended stregnth for countertops to avoid denting etc. 18's ok, but you'll find most fabricators want to use 16.

    by the sq ft they can be as expensive as some granites...but you don't have to buy the whole slab here :oP

    i planned this look all along...you tripped into it, but i'd bet that in the end we both will love them as much!

  • 18 years ago

    Thanks! A local sheet metal shop did our SS countertops, hoods, and integrated our sink. I believe the gauge was most likely 16. We did a very minimal overhang on our SS & granite. The sink is by Julian, with rounded inner edges.

  • 18 years ago

    I think it would be more important to have a heavier gauge with the integrated sink. With the way ours is wrapped over the wood, I don't know how it would ever dent. It'd have to be quite something to dent the stainless and the wood, which is what it would take...Maybe they're not all done that way? Mine isn't brushed so pretty like gizmonike's either...Just plain satin finish, but it's practical and utilitarian and I like it fine that way. Anyway, still a good option to check into, and wouldn't have to be overly expensive.

  • 18 years ago

    Thanks rhome410, igloochic and gizmonoke. I'm armed with info now and know what to ask for tomorrow as I start my inquiries. Appreciate it so much!