Software
Houzz Logo Print
jaksopcam_gw

Tips for Installing a Farmhouse sink

17 years ago

I am looking for info on installing a copper farmhouse sink. My granite place told me the sink has to be in before they come and do the template. I'm not 100% confident in my contractor and my GC said the granite people have to anchor it to the granite but we can just "float it there" so they can do the template. That doesn't sound too good. The actual guy who has been doing the kitchen (I have issues with that - more to come in another post) told me he has installed farmhouse sinks before. I'd like to have some info so I can appear somewhat knowledgeable tomorrow when they come to install it.

Should this be supported from underneath? How is the installation usually done. I can't find any info on installation on the Copper Sinks Online website and it didn't come with any directions. Any help is greatly appreciated.

Comments (12)

  • 17 years ago

    This website has a lot of posts on farmhouse sinks and the different kinds of installations:

    Here is a link that might be useful: installation of farmhouse sinks

  • 17 years ago

    allison0704 thanks for that link. It had some useful information. I'm also looking for specifics on how it is mounted and supported. Anyone??

  • 17 years ago

    Circuspeanut (that name makes me giggle!) thanks for the link. Some of it got a little technical for me and my brain sort of shuts down, but that's just me! But the photos helped and your idea of the cradle was what I had in mind but couldn't verbalize -so thank you. I also appreciate your tip about the bucket. I never would have thought of that.

  • 17 years ago

    My dad installed mine.... he built a reinforced "shelf" in the cabinet that the sink sits on. It is anchored to the shelf with the silicon underneath.... and the granite is on top of the lip, so it's not going anywhere.

    The sink definitely has to be in place... and I mean IN PLACE, not floating (if it moves before the countertop goes in, that would be bad news!).

  • 17 years ago

    We are DIYers, and we cut the front sides of our sink cabinet down and built a cradle out of 2x4s securely screwed into the cabinet walls. When our fabricator came to template, the sink was just sitting on the cradle. He did his template and took the sink with him. He also took our cooktop. The top of the sink is siliconed to the granite, and the sink sits securely on the cradle. I believe he secured the sink to the cradle with epoxy.

    Our granite was installed yesterday-Hooray! In this photo you can see part of the cradle under the sink. (You can also see some of the "nifty" vinyl from 1941 on the floor-ha!)

  • 17 years ago

    Funny you should mention this as I am worried about the same thing right now! I had to get a separate contractor to remove a structural post in my kitchen because my cabinet installer from Lowes is not allowed to remove a bearing wall. The Lowes installer is supposed to prep the sink base cabinet with 2x4 supports for the farmhouse sink. The granite installers also under contract from Lowes say that they do not install the sink and the Lowes cabinet installer says that he's not installing the sink. I'm not sure if we are having semantic problems with the word "install", but I am not very happy at the moment.

    To top it off, I don't have a template for the SS farmhouse sink because it was a close-out on Overstock.com and it was a known issue that it didn't come with a template. I guess I won't pay the cabinet or granite installers if one of them doesn't take responsibility grrh...

  • 17 years ago

    My carpenter retrofit my existing cabinet. Here are a few good pics of his install of support system.

  • 17 years ago

    Didn't have my farmhouse sink in yet when they did my template. Matter of fact, they installed the granite yesterday without the sink installed. Cut the granite here then installed the sink. They also cut the cooktop here too. Needless to say , it was a little dusty around here... ;)

  • 17 years ago

    Wow, shelayne, the granite turned out great after all.

  • 17 years ago

    Thank you everyone! Your answers have been so helpful and the photos have been great to help me visualize what needs to happen. The GC just told me the sink is definitely being done tomorrow and the guy doing it has installed many, many farm sinks of all kinds. The GC was the one making me really nervous but it turns out he didn't really know what a farmhouse sink was. So all his talk of just "floating" it there was just talk. So thanks to him it was another sleepless night! But first thing I did in the morning was check GW for the answers. And shelayne - great looking sink and granite! And gee whiz, that sure is neato tile!

  • 17 years ago

    Writersblock and jaksopcam, thank you! I think we have benefitted from the fabricator dropping that longer section (there are two more individual sections elsewhere in the kitchen), as we have no seam until the cooktop, and then the seams are almost invisible. Originally, we were to have a seam to the right of the sink. This is so much better, and we are so pleased how it turned out! I am doing the happy dance. :^)

Sponsored
Hope Restoration & General Contracting
Average rating: 4.7 out of 5 stars35 Reviews
Columbus Design-Build, Kitchen & Bath Remodeling, Historic Renovations