Software
Houzz Logo Print
pluckymama_gw

What size is your trash pullout?

18 years ago

My KD designed a 21" double trash pullout. My cabinetmaker is saying he usually does an 18"double trash pullout and that would give me 3 more inches to the super susan next door. What would you do and what size trash pullout do you have?

Comments (13)

  • 18 years ago

    I have a 21" double trash pullout in my new kitchen. I love it! My thought was the bigger trash cabinet, the better. When I originally spoke to a "custom" cabinet maker he insisted he would only do a 16 1/2" trash cabinet. Gee, that doesn't sound custom to me? Needless to say, I ended up getting other cabinets (Medallion) and my 21" double trash cabinet! Get what you want. Not what a cabinet maker tells you. Hope this helps!
    Barb

  • 18 years ago

    I think our actual pull-out is 18" but the cab/door is roughly the same width as our Miele DW (planned symmetry and all). The interior of the cab is somewhat divided, with the bulk of it dedicated to the trash pullout, and we ended up utilizing the narrow (few inches) space next to the main part for storing the our oven's third rack.

  • 18 years ago

    18" and it works just fine.

  • 18 years ago

    18" and two bins/cans (trash in front, recycle in back).

    What size is your lazy susan door now? If it's quite small, you may need those inches? Standard is 12" on each side, but they do come smaller. I've had lazy susans (and I do like them) but I would not want a door smaller than 12" on each side of the corner. They also come w/diagonal doors, usually 17" wide. Again, I wouldn't want anything smaller than that!

    BTW...I've seen 24" trash pullouts w/4 bins...usually called a "recycling center"

    HTH!

  • 18 years ago

    21" . My cans are offset to the right so we could have space on the left for some sort of device to hold a dispenser for my roll of trash bags. GC is making this and it's not done yet.

  • 18 years ago

    I have an 18" trash pull-out and it works just fine (double cans). I just looked at your design, and I think I would go with the 18" trash and add the width to the 11 3/8 inch doors, if I were you. I have some 12 inch doors and they are fine, but I think that if you can add an inch and a half to those 11 3/8 inch doors it would look better and still function fine. Anyhow, that's what I think, FWIW.
    Good luck it!

  • 18 years ago

    I agree with KimKitchy. As far I can tell, 18" would make it look better, not worse. I'm not sure what you mean by symmetry. If a dishwasher is on one side that doesn't mean you have to have a 24" cabinet on the other side. Or do you mean symmetry with regard to the lazy susan? Anyway a 15" trash pullout has one can and usually a place for trash bags. An 18" pullout has room for two cans, but no special place for trash bags. I chose an 18" trash pullout because a 21" trash pullout can't really fit bigger trash cans than the 18" and the extra 3" isn't good for much else (IMO). I didn't have room for a 24" and neither do you with your plan as shown here. Just what I think anyways; hope it helps!

    - Jim

  • 18 years ago

    We have an 18" cabinet for our double recycling bin, don't need anymore room.

    We have two 33x33" lazy susan cabinets with 7-3/4" double doors and can fit everything in that I need to. DH was originally worried about the small double doors, but I wanted the extra space for the drawers next to the stove. As you can see I have plenty of room:


    Good Luck!

  • 18 years ago

    An 11-3/4" cabinet is pretty narrow...especially when you factor in the walls...you really have only an 8-3/4" cabinet (assuming 3/4" walls).

    Adding those 3" to that cabinet will make it much more versatile, IMHO!

    However, we all have to ask ourselves what is more important...function or form (in this case function or symmetry). No one answer is correct...it's up to you and how you feel/what you think!

    If you decide to stay with what you have and you aren't sure what to do with that narrow cabinet, you might look into some of the Rev-A-Shelf filler & other pullouts.

    This would work if you add the additional 3" to the left cabinet:
    Rev-A-Shelf Wood Base Organizer 448-BC-11C

    This would work if you leave it the way it is:
    Rev-A-Shelf Wood Base Organizer 448-BC-8C

    Note that you can buy these online at various places much cheaper than at the Rev-A-Shelf site!

    BTW...if you have any 3" or wider fillers (base or wall), you might want to look into these filler pullouts!

    Rev-A-Shelf Base Filler Pullouts

    Rev-A-Shelf Wall Filler Pullouts

    Note filler pullouts must be installed at the time of cabinet installation. It is very difficult if not impossible to install them after the cabinets have been installed.


    HTH!

  • 18 years ago

    Thank you all very much. This helps a lot. Those 3" will help that narrow cabinet next to trash. Your pics and posts are great. So I'll go w/18" double trash like cabinetmaker suggested and gain more function and the form will look just fine.

    Thanks for the rev-a-shelf links. Anything to improve storage is always welcome in my life ;)

  • 18 years ago

    Oops! I just realized I quoted #s for framed cabinets only...

    Do you have face-framed or frameless cabinets? In my calculations, I actually accounted for 3/4" walls + 3/4" additional frame, i.e., 1-1/2" total frame on each side....giving us
    Current cabinet: 11-3/4" - 1-1/2" - 1-1/2" = 8-3/4"
    Wider cabinet: 11-3/4" + 3" - 1-1/2" - 1-1/2" = 11-3/4"

    So, if you have face-framed cabinets, then my previous post still stands.

    If you have frameless cabinets, you actually have 1-1/2" more than I stated above (only the 3/4" walls).
    Current cabinet: 11-3/4" - 3/4" - 3/4" = 10-1/4"
    Wider cabinet: 11-3/4" + 3" - 3/4" - 3/4" = 13-3/4"

  • 18 years ago

    buehl, I have inset cabinets, so that would be framed.