Software
Houzz Logo Print
hzdeleted_1401217

Know a source for l-o-n-g Return Rods?

19 years ago

I have two French-door sliders on one wall. One of these has 4 doors and measures 144" (outside moulding measurment) and the other is 2-door measuring 75" wide.

I found some pewter grommet ticking stripe curtain panels @ PB that I plan to use for these and am having trouble finding a suitable rod to fit the 4-door.

Because it's such a long expanse I thought I should go with metal instead of wood. I know that I will have to have a support bracket in the center.

For privacy at night I need to have these doors dressed, but during the day I would like to be able to slide the curtains way over to the side to expose as much of the doors as possible. That's why I went with grommet topped - they stack much more compactly than others I've considered.

I thought a return rod would be the best choice since I'm not going for a decorative rod, just a functional one, and the panels won't be bunched up against a finial.

Country Curtains has this type rod, but not long enough for my big slider. It doesn't have to be in pewter, nickel would also work. Anyone have a source they can share? Thanks!

Comments (6)

  • 19 years ago

    You could try calling these folks and see what they say.

    Here is a link that might be useful: Custom Curtain Rod Manufacturer

  • 19 years ago

    You may need more than one support if the drapery is heavy, at least on the wider expanse. If that is the case, pulling them closed will be an issue with that type of rod as the supports will get in the way.

    JC Penney sells the rod, but the widest it comes is 120". Some better rods allow you to add extenders in the center to get more length. I have that on my front window, which is 134" wide.

    curved rod

    You might try a larger home decorating place like EXPO or the great indoors, or a home furnishings store that does custom window treatments to see about getting the extra length rods.

    I assume you will be sewing panels together to allow you to open and close them more easily and not have to constantly be fussing with them as much. At 50" wide, you will want 5 or 6 panels for the larger window, at least 2 for the smaller one.

  • 19 years ago

    Thanks for the responses. I do think I'm going to have to hit the pavement to try to find the right thing at an affordable price.

    kitchendective, I actually did find Highland Forge yesterday and did a quick mock-up order to estimate cost. It was lots. Just for the one door I was beyond $400 (it's not the rod, but brackets, etc. that drive up the cost.) I've already spent nearly $500 for the panels...but I might not have other alternatives.

    les, I am definitely planning to stitch the panels together. UPS delivered them yesterday and I'm very pleased with the quality. They have a softer hand and nicer drape than some ticking stripe panels I have from Country Curtains. The new ones are also nicely lined. Now I just have to find a way to hang them!

  • 19 years ago

    You can buy two rods the longest possible. Use the larger size from each end rod with the smaller in the middle. These would actually be stronger since the middle rod would set further inside than the norm. Support as mentioned by Les will still be needed regardless of type of rod.

  • 19 years ago

    I did what emagineer described using cheap metal decorative rods from JoAnns to cover a wide patio door. I think I used 3 rods to make one very long rod.

  • 19 years ago

    Thanks, I will check out that possibility. I hate to admit how many times I had to read emagineer's post to be able to visualize it - I am so bad at that... But it seems like a simple and sound solution.