Software
Houzz Logo Print
hellonasty

Tile before or after intalling the hood?

16 years ago

Quick question.

Are you supposed to tile before or after installing the ventilation hood?

A little info: we're tiling up to the ceiling behind the hood, with glass tiles.

Comments (21)

  • 16 years ago

    I'd say before so you don't have to cut tiles around it.

  • 16 years ago

    You can do it either way. I think there are pros and cons to both. My GC tiled after the hood went up. I think it was something to do with not being able to fit the ductwork through the ceiling beams if he tiled behind it.

  • 16 years ago

    thanks for the info!

    The reason I am asking is because the tiles aren't in yet and I really wanna get this hood up so I can start cooking. I'll talk to my contractor and see what he thinks.

    Anyone else have any opinion?

  • 16 years ago

    We tiled the entire space (actually put the duct up, popped it off for the tile work, and put it back up--and I think we had a few go rounds of this--fun!). We figured, if we ever decide/need to replace the vent hood, at worst, we might need to replace the few tiles with screws/anchors drilled into them (e.g. if the new hood/ducting didn't cover those). If we tiled around the hood/ducting, we'd be locked into finding something that fit the opening exactly.

  • 16 years ago

    We tiled before, at the recommendation of our contractor.

  • 16 years ago

    Well, you can cook, but just don't cook anything fried, smelly, or smoky :) God knows we've been doing that in our basement temp kitchen for 6 months now! No hood there and about a 6.5 foot ceiling!

  • 16 years ago

    Thanks, cat_mom. So is what you're saying you had the hood up and were using it and removed it to do the tile work and then put the hood back up? I wish we could do that but we're not doing the work ourselves (not sure if you guys did, either?) so we're probably just gonna have to wait til the tiles come in, do the backsplash, then the hood. Could be a couple more weeks. Man I wanna cook!

  • 16 years ago

    Good point about just cooking now. I did cook in the old kitchen without a hood for 12 years, so it shouldn't be much of a problem now, except for the fact that now I'll be cooking on a Wolf which is more powerful than the old range. We shall see!

  • 16 years ago

    Definitely before because of all the reasons stated and the hood looks better when its resting on tile.

    Not sure what kind of hood you have but can't you install it and then remove it for tile and put it back up after tile.

  • 16 years ago

    We did before. Tile matches much better and if there's ever a change no problem. Just think of it as a wall and the hood as an accessory.

  • 16 years ago

    What weedmeister said.

    Once that's figured out, though, it'd look alot cleaner if the tile goes up first, rather than cutting into the hood and caulking it.

  • 16 years ago

    Our tile guy asked us to make a plywood piece the exact size and shape of the hood. The hood would be mounted to the plywood and the tile would go up to it. I'm not sure why this is better than just tiling the wall and putting the hood over the top of it. May-be I should talk to him again . . . . .

  • 16 years ago

    DH had installed the hood, all the duct work, etc. When I decided on my backsplash tile, he took the hood down and installed the backsplash which went all the way up behind the hood. The hood went back up after several days to allow for grouting, sealing, etc.

  • 16 years ago

    Our tile is being installed after the fact- We hadn't picked out our backsplash until 6 months after we moved in so it will have to go "around" the hood..

    I guess that is not the best solution according to everyone above but I think it is the only solution for us terms of duct work etc. Oh well.. If this thread is still around next week ours will be installed on Monday so I can let you know how it turns out :)

  • 16 years ago

    THANK YOU, fine people of gardenweb.com :) :)

  • 16 years ago

    Before but you know that now from the responses :)

  • 11 years ago

    Hi


    I read some of you have done the tiles after the hood went up. We have to do the same way as the builder is not providing the back flash and he charges 3 times the amount to do the back flash. Hence we plan to do after its finished.

    My question to all those who have done the back flash after the hood.

    I believe you had to do something to change the wallmounting screws to bring it front. How did you do that?

    If the Hood was going to ceiling then how did you manage to account for the width of the tile to cut the outlet.


    Thanks

    San

  • 9 years ago

    Above responses support my plan of tiling right up and install hood over tile after first drilling through tile where two anchor screws go. My only concern before this was of cracking the tile when tightening the screws holding the hood on. I was thinking of drilling about a 5/8th " hole for the screw and putting a metal tube cut spacer to take the pressure off the tile when tightening. Any thoughts?

  • 9 years ago

    And if it its tiled first how would the electrics be chased in neatly?


  • 4 years ago

    I have a custom wooden hood that is already built and in place and will have a hood insert. I have the same question because I am really worried they will chip my expensive custom tile mural if I tile first then put the insert into the wood hood. They made the wood hood deeper than the hood insert so I don't think there will be an issue if they put the hood insert in first. Mine isnt the kind with tile going around the hood it is just tiled in a straight line under the hood. I am asking the hood installers when they come and look at my hood what to do .