Software
Houzz Logo Print
jenanla

27'' Copper Farm Sink??

18 years ago

Is there such a thing, and where do I get one? My base cabinet is 27" and I would like the sink to be the same size as the base. I can only find 30"

Thank you

Jenn

Comments (19)

  • 18 years ago

    I had mine made (all of them) at handcraftedmetal.com. The quality is incredible, and I'd do it again (get my sink from them) in a heartbeat. If you want to see them, pictures are on My Page.

  • 18 years ago

    Claire,

    Thanks for the info. I will check into them. I love all of your sinks. I've never seen a 2 sided apron front before.

    I happen to be a big fan of Copper (I have a Copper counter on my island), but had been planning on a soapstone sink, which is easily available in 27", but of course at the last minute I'm thinking Coper would look great.

  • 18 years ago

    There's a huge variety of copper sink styles & sizes on eBay. Just make sure that you know the exact interior width of your base cab & the dimension of the sink bowl. IOW, a 27'' sink bowl won't fit in a 27'' cab (because of the thickness of the cab side walls.) (The interior of a 27'' cab is probably going to measure +/- 25.5''.)

  • 18 years ago

    Thanks for the info. ci lantro, but now I'm confused. I was told by the Soapstone company that I've considered going with and my KD that a 27" outside diam. farm sink would fit in a 27" base.

  • 18 years ago

    Hello jenanla,

    As a copper sink fan (I live with several throughout the house) I would highly recommend you read the linked article below before buying a copper sink. I did a ton of research and for a kitchen sink there are a few very important things to consider:

    Gauge thickness - Almost all copper kitchen sinks I found were 16 gauge with the exception of two companies making them in the heavier 14 gauge. The one we chose - Copper Sinks Online is one of them. Copper is somewhat soft and although the "hand hammering" strengthens them, the thickness is important. There was a 30% - 40% weight difference between the 16 gauge sinks we looked at and the 14 gauge sink. You will thank yourself down the road for getting the heavier sink after years of pots and pans and other normal wear and tear. Our sink still looks amazing after two years of use.

    Quality -- I cannot emphasize more that not all copper sinks are identical - there are huge differences in quality in these handcrafted sinks.

    Reputation -- There are many different companies out there and lots of Ebay sellers, but just a handful that have been around 5 years plus. We wanted a US based company that had been around for a while.

    Read the article and educate yourself before you purchase. The company I bought from was fantastic and many many others on this board have bought from them as well with equally positive results.

    As for the size of the sink, one thing to bear in mind is that for the kitchen sinks, sometimes the size is quoted as an "inside dimension" and other times an "outside dimension" (IS or OS). The OS will be the limiting factor when it comes to your cabinets. ...however, with copper, we found during the faucet installation that trimming away some of the flange was no big deal. In other words, if the OS is 28", you may still be able to work with it. ci lantro is probably correct that there is a frame around the cabinet and you need to work within the interior dimensions of the cab. Talk to your cabinet people and they will be able to help you out with this. I agree that I don't think you can fit a 27" sink in a 27" cab... With the thickness of the stone, the IS would probably be max 22" or so.

    One other note - I believe you will find a 25" copper farmhouse at CopperSinksOnline.com that would work for you. I went and looked. The bowl is 10" deep which we have found to be great for pots and pans. This is still a fairly large dimension and might work for you.

    Good luck!

    Here is a link that might be useful: Copper Sink Buying Guide

  • 18 years ago

    flyinghigh- Thanks for the info. Did you get your copper sink pre-waxed, and what finish did you get? It's a little hard to tell on a computer screen what they will look like in real life. I think I will get the 30" (OS) undermount sink from CopperSinksOnline...they look very reputable. How long have you had yours and how is it aging?

  • 18 years ago

    Hi terryskit,

    I posted our kitchen pic on a different thread about pendant lighting yesterday - maybe you saw it there. We bought the Dark Smoke finish with Oil Rubbed Bronze finish faucets (they have a sale price if you buy the sinks and faucets together I noticed recently).

    We did buy the sinks pre-waxed and apply the wax about once a month or so. ...it's kind of like waxing your car - you see the water bead up when it has a good coat and when that goes away, you take a minute and apply some more. Other than that it's soap and water clean up. They are probably the easiest sinks to maintain that we have ever had.

    We have been living with our copper sinks for several years. They change a bit but haven't gotten any darker, if anything the patina will lighten a bit if something really acidic sits in the bottom of the sink overnight, but a few weeks later and the lighter area just "disappears" or melds back into the weathered brown look. ...they seem to have their own personality... We love them and they are built like a tank so I suspect they will last for a very long time.

  • 18 years ago

    flyinghigh- thanks for the link to the article, very informative. I agree that the guage of the copper is important.

    I'll have to talk to my KD to confirm what size sink will definitely work before I make a decision.

    The sink base we ordered is specifically made for a farm sink, and there is a "false panel" that I was under the impression would be cut to fit the sink and could be done 2 different ways.

    The 1st way would be to use a sink a little smaller than the base and leave some of the panel on either side of the sink.

    The 2nd way would be to eliminate the panel and use a sink that is the same size as the base.

    I prefer the 2nd option (if in fact it is an option) because our sink base will be bumped out and the counter top will not be bumped out therefore leaving @ 1" of the sink (front corners) exposed.

  • 18 years ago

    Jenanla--Good thing that I checked back in on this thread. You did say 'farm sink' but it didn't register with me. I was thinking drop in or undermount when I made the sink size/ base comments. Big mistake on my part! I apologize for confusing the issues!!

  • 18 years ago

    No worries ci lantro.

    I just want to make sure I order the correct item. I'll give my KD a call on Monday (figure I'll give him a break over the weekend). I keep asking him if he's sick of me yet, (he just laughs).

  • 18 years ago

    this company gives great advice

    http://www.rachiele.com/coppersinks.htm

  • 18 years ago

    Jenala--I found one! Whitehaus makes a 27'' copper sink.

    Model# KS2519FC

    Outside dimensions: 27 x 21

    Inside dimensions: 25 x 19 x 10

    Here is a link that might be useful: Copper Farm Sink

  • 18 years ago

    Bumping--hopefully Jenn will see this

  • 18 years ago

    Bump

  • 18 years ago

    ci lantro- Thank you! I have not been around the past few days because I've been busy putting 4 COATS of Waterlox on our pine floors.

  • 18 years ago

    (jenanla, I feel your pain - have been doing the exact same thing all week on my fir floors, argh.)

    Have you seen these photos? The double bump-out can look pretty cool if you can only find a sink you like in dimensions smaller than your cabinet:

    {{!gwi}}

    Here is a link that might be useful: atticmag's sinks we love gallery

  • 18 years ago

    circus- I agree that that the double bump-out looks very nice. I would not be opposed to it, except in order to be able to get all of the things I hope for in my kitchen I've opted to go with a Lumber Liquidator butcher block counter for the sink wall. I would have gone with the Ikea version as it is even less expensive, but it is too short (neither of these brands is deep enough).

    We are at the end of a whole house build and I my wallet is really feeling the strain of the some of the upgrades, so I need to save where I can.

    My original plan was to get a 27" Soapstone sink, which may still be the route I go, but I am a big fan of copper. Maybe I'll use copper as a bar sink.

  • 18 years ago

    You could use copper as a countertop ... *grin*

    Here is a link that might be useful: my copper counters

  • 18 years ago

    I love your copper counters (I'm impressed that you did them yourself).

    I guess I forgot to mention that I am bringing with me, to the new house, (my current) black distressed island that has a copper counter. We had it made 4 years ago and I'm not willing to part with it.