Software
Houzz Logo Print
christen7

Polishing, buffing stainless sink?

18 years ago

We are starting the demo on our kitchen remodel next week (YIPPEE-I think). We have decided to keep our stainless sink since it is only about 5 yrs. old. My KD reccomended taking it somewhere to have it buffed/polished. I called the only two stainless places in town and they sort of acted like I was from mars...

Soooo, does anyone have any advice (other than stainless spray polish which I've already done). We could buy a new sink but I felt like it will have this same look in a matter of months anyway so why waste the money.

Any thoughts??

Comments (5)

  • 18 years ago

    So, tell us...

    Do you love your current sink? Is it exactly what you want (standard vs farm, single vs double bowl, size, depth, etc.)?

    Are you happy w/stainless steel or do you yearn for something else (Silgranit, fireclay, etc.)?

    Is it undermount or drop in?

    If you bought a new one, would it be undermount or drop in?

    What material is your new countertop going to be?

    Is it in the budget or will it cause you to go over budget?

    If you are putting in an undermount sink and are using a stone, engineered stone, or other expensive product, I would seriously consider replacing the sink now as it is very difficult, if not impossible, to change an undermounted sink later without removing the countertop.


    When we redid our kitchen (and it's still not done), we did replace our SS sink with another SS sink. But, ours was 13 years old, drop in, and the bowls were too small. (We donated the sink to a friend who wanted a utility sink).

    We went with:
    * another SS sink (I happen to like SS sinks),
    * 2 bowls but with one bowl 21-1/2" wide & the other 10-1/2" wide
    * undermount
    * 16 gauge SS (old was 18 gauge...somewhat thinner than 16)
    * grids in the bottom of both bowls (sink came w/the grids)


    If you're feeling guilty about replacing a sink that's not that old, consider either reusing it elsewhere (laundry room, basement) or donating it to Habitat for Humanity, your church, or other charity that takes such things.

  • 18 years ago

    I always sorta thought stainless steel sinks look best once they're "broken in". I hate that "in-between" stage when a shiny new sink is starting to get scratched up. The scratches then always look so obvious. Once the scratches all blend together, the sink looks fine again.

    If your current sink suits you, and if it's still serviceable -- I'd just keep it and reinstall it. You won't have to go through that "in-between" stage again.

    Just my two cents.

  • 18 years ago

    You could try an auto body place. They have lots of metal and polishing experience.

  • 18 years ago

    I had the brass door knobs on my old house polished. After making many calls (I was in a large urban area then), I found a place that made/chrome plated fancy parts for motorcycles.

  • 18 years ago

    Love all the advice!
    Buehl-I think we have the same sink!! My current SS is undermount wider side on the left, smaller on right with disposal (I hate when dishes get in the way of the disposal!). It is 16 guage. When we bought the house 5 years ago, we put in new granite counters w/this sink and new hardware to 'get us by'. I like the SS. I was getting tempted by the silgranite because of this website but hubby wasn't crazy about them. We are using Golden Caramel granite on this redo.

    Wa8b-I never quite thought about the SS in those terms but you are absolutely right! It now has a uniform soft, brushed look to it. I think I'm keepin' it!!

    Thanks guys!