Software
Houzz Logo Print
bicyclegirl1

Backsplash installation question

11 years ago

I posted over on the remodeling forum, but I know there are some DIY'ers over here that might have some good advice or feedback.

I'm helping a friend put her backsplash up this coming weekend. I've tiled walls, floors & backsplash before, but the ones I've done, were fairly good size tile that were pretty easy to work with. She's using 1x1" glass tiles that are on a large mesh sheet. It's probably about 12x12" & the sheets are pretty heavy. I wonder if we'll need a certain type of mud to put them up so they don't slip down before they dry. Or a certain consistency of mud? They're going up onto textured & painted sheetrock, if that's important. It's been awhile & I'm going to google to make sure I have the steps down, but if anyone on here has used something similar, I'd love to hear your experience.

Another thing I'm concerned about is, the glass tiles are kind of fragile. They can break pretty easily. It's a little intimidating thinking we may have to cut a little piece off one of those tiles. I've used little clippers when working w/ subway tiles, as an example. They worked great. With this tile, all that will do, is break one of those little bitty tiles in pieces. We'll have a wet saw, but that could be a disaster w/ cutting just a little edge, if needed.

Are we getting in over our heads?!?

Thank you in advance for your help.

Comments (7)

  • 11 years ago

    Sorry, but yes, you sound as though you're in a little over your head. You can't use tile nippers on glass tile, you have to use a wet saw WITH A DIAMOND BLADE that will cost about 3x what you paid for the wet saw. If the area you're tiling is not smooth but "textured" how will you lay the tile flat? The mortar should be the consistency of peanut butter and it should hold the sheets just fine.

    Have you stumbled upon the thread where I show the scar from my finger surgery? I got a shard of glass stuck in the tendon of one of my fingers while trying to remove, you guessed it, 1" x 1" glass tile from my bathroom tub surround. Proceed with caution, if at all. This is nothing like laying ceramic tile.

  • 11 years ago

    It can be a little fun. You'll need to go with thicker mud, and remember to knock down the ridges before you put the sheets up or you'll risk being able to see them along the edges of the pieces of glass.

    Depending on your wet saw it may have come with a diamond blade. The DeWalt one does anyway.

  • 11 years ago

    Oh no EAM, that's horrible. Did it get infected? Very scary. I figured this was going to be a different application with glass, especially 1x1" glass. I knew those nippers weren't going to work, which is a concern. There's a place here that rents a diamond blade wet saw, & yes, much higher price, but not too bad. When I called to see if he had a wet saw, he told me I needed the diamond blade. I thought he might be up selling me but I guess not. So, if we do proceed to take it on, we'll rent that one.

    Thanks for the info on mud texture, as well . We'll see how we proceed...if we do proceed!!

  • 11 years ago

    Hey schicksal, I think laying tile is fun. It's kind of therapeutic for me, but I'm beginning to wonder just how zen this might be w/ the glass tile! I'm pretty adventurous, so we'll probably move forward w/ it. If we end up overwhelmed & shouldn't continue, we'll stop & she can call in the professionals. But, I think we can do it....hopefully!

    Thanks for the suggestion of knocking down the texture. It's not too heavy of a texture, but I was thinking we might do a light sanding to the walls before proceeding.

    Thanks for the encouragement!

  • PRO
    11 years ago

    You need a thinset mortar made for glass tile. The stuff I've used is an off white color. Read the back of the package to make sure you've got the right stuff. Less is more; you don't want the thinset squeezing into the grout joints too much. Don't panic if it does and dries, you can scrape it out.

    After checking the top for level, lay a continuous shim the thickness of the grout lines between the top and the first row of tile. Set the tile, grout, then pull the shim and push color matched silicone in the gap. Always caulk a plane change.

    Finger injuries are part of tile work. I got bit twice yesterday on a replacement job. Wear gloves.

    No, it's not too big a project. C'mon, it's a backsplash.

    This post was edited by Trebruchet on Tue, Feb 3, 15 at 9:20

  • 11 years ago

    The best tool for cutting glass is a handheld glass cutter. Couple of bucks at the hardware store. Or $15 at a stained glass supply store for one with a carbide wheel. Make sure you follow the manufacturer's (of the tile) instructions as to what thinset to use. You want to use a highly modified one, and make sure it's white. If you find the sheet starts slipping down, you can put in some strategically placed finish nails or brads just far enough to hold the tile up. Remove the nails before grouting.

  • 11 years ago

    Ok, I'm on! We're doing it! I do anticipate a learning curve w/ this small glass tile that I've never worked w/, but I'm pretty much of a perfectionist, so I'll do what needs to be done to get it right...even if it takes all weekend! I think we'll be fine.

    Thanks for the info Tre...& a little cheerleading too! Watch those fingers!

    hemera, great sounding tool! I'll get my friend to pick one up when she's out getting the other things. I like your nail or brad idea if needed. I'll be prepared w/ those.

    I'll post some pics after we get it finished. Thanks again everyone!