You fail to mention the most important thing- the actual size of the bathroom. If it is a 5 x 8, you may not have space for everything you need do the code requirements, such as that the toilet needs to have a total of 36" for its area, and similar. In addition, moving plumbing can really add up fast. Send along a sketch and sit back to watch the Houzzer advice pour in!

Thanks so much! Can't believe I forgot to add my pictures and sizes...too much snow LOL. I will send those along as soon as downloaded...and Thanks so much in advance.

Code requirements for a toilet is 30", not 36".

P2705.1 General

The installation of fixtures shall conform to the following:

1. Floor-outlet or floor-mounted fixtures shall be secured to the drainage connection and to the floor, where so designed, by screws, bolts, washers, nuts and similar fasteners of copper, brass or other corrosion-resistant material.

2. Wall-hung fixtures shall be rigidly supported so that strain is not transmitted to the plumbing system.

3. Where fixtures come in contact with walls and floors, the contact area shall be water tight.

4. Plumbing fixtures shall be usable.

5. Water closets, lavatories and bidets. A water closet, lavatory or bidet shall not be set closer than 15 inches (381 mm) from its center to any side wall, partition or vanity or closer than 30 inches (762 mm) center-to-center between adjacent fixtures. There shall be a clearance of not less than 21 inches (533 mm) in front of a water closet, lavatory or bidet to any wall, fixture or door.

6. The location of piping, fixtures or equipment shall not interfere with the operation of windows or doors.......