Software
Houzz Logo Print
donna_loomis

Advice about a stupid mistake

11 years ago
last modified: 11 years ago

I'm using lightweight fusible web for some appliques. I have twenty pieces. Of course, on the LAST piece I had the web on the wrong side and I fused it to my iron plate. I got the piece off, but now the plate has residue on it. I ironed over and over on some waste material and that didn't help. I ironed on some wax paper and that didn't help. I'm letting the iron cool down now and I'll have to try something else. I have one of those green scotch brite pads and I'm thinking of trying that, but I'm concerned it might scratch the plate. I need advice. Thanks.

Comments (6)