Software
Houzz Logo Print
whirlwindgirl

Freestanding to slide-in range?

We are remodeling our kitchen starting next week. We have a free-standing frigidaire induction range that is just over two years old and works great so we are re-using it.


But when it dies, I think I'd like to get a slide-in range. Is it possible to retrofit a slide-in? Is there anything I can ask our GC to do in this remodel that would make that possible/easier?


Thank you!

Comments (15)

  • 11 years ago
    last modified: 11 years ago

    How creative do you want to be?

    Read the installation instructions for a slide-in and prep your space for that product.

    The big difference is the counter space option between the rear of the slide-in and the wall.

    You may need to have a removable counter piece and mounts made to go in that spot for when you replace your freestander. And wall treatment/backsplash must be finished to that piece when in place.

    But what if you want a slide-in to go with deeper than standard counters, say 28" or more?

    While that's no problem with a slide-in, you will need a false rear wall section with returns to make that work temporarily with your freestander. At least high enough to create a shelf behind the riser part of your range. Again the backsplash must be installed for the slide-in. When I visualize this short ledge or shelf idea I think you could even use it for an island install.

    The new Frig slide-in induction has a minimum oven temp of 170. Pretty limiting for me.

  • 11 years ago

    We have enough tile to tile down to countertop height and it's plain tile to be set in a plain pattern so I was going to ask for it to just be tiled that way.


    Counters are marble. I could ask about having a strip fabricated now for future use if the size would be standard across slide-in ranges? Or I could ask to have a small remnant left with me to be fabricated in the future if that's not a standard dimension.


    I don't think I understand the depth issue. Are slide-ins not meant to go with standard 24 inch deep cabinets?

  • 11 years ago
    last modified: 11 years ago

    Sure but they can go into an island which will not be 24 inches wide or anywhere else you can come up with. That's why I was offering some of the options you have if you want them. I wouldn't give up my 29" deep counters. Another example is using one to chop off a convex corner to give three sided access to the cooking surface for multiple users.

  • 11 years ago

    I probably shouldn't say anything, because I really don't know, but isn't it the opposite? Isn't it the slide ins that have less depth and typically need the piece at the rear? This is so confusing!

  • 11 years ago
    last modified: 11 years ago

    Isn't it the slide ins that have less depth and typically need the piece at the rear?

    Yes, that's right. But they usually come with a metal filler piece you can use if you don't have a piece of countertop there.

  • 11 years ago

    Most of the slide ins that I have seen are the same depth overall as a freestanding range, however, the top of the range normally stops a few inches from the rear of the oven, so that there would be a few inches of countertop behind the top of the range at the rear. To crl, while I agree with the answers by dan, not sure why you would want a slide in later. Typically, you have less selection than freestanding ranges, and usually the price is more expensive than a similarly equipped free standing range from the same manufacturer. Jenn Air offers quite a few slide in ranges, but the ones I have seen have the exhaust vent to the floor, so it requires modification to the space if you are currently using a free standing range.

  • 11 years ago

    Thanks! This would be for installation in a standard depth cabinet run. Sounds like I should definitely have the tile down to counter height. And I could ask my GC about leaving me a small remnant that I could have fabricated, but it probably isn't strictly necessary as I could use a different filler piece.


    I appreciate the help.

  • 11 years ago

    Sorry, we cross-posted. I like the looks of the slide ins. I might not want one after all. But if there are simple things I can do now to preserve the option in the future, I would like to do so.

  • 11 years ago

    I like slide-ins because the crevice between the cooktop and the sides of the cabinets and the range is cover by a flange.

    Nothing Left to Say thanked palimpsest
  • 11 years ago

    crl_
    You might check out the new Frigidiare induction slide-in, Frigidaire Gallery FGIS3065PF. It seems to be a slide-in version of the free-standing range you have now. May have a slightly smaller oven interior. Definitely has a bit of bump in the back but otherwise designed to fit in exactly where the freestanding went. They apparently have trim pieces and/or a backguard kit to cover any gap at the back. I personally like having a rotary knob interface for the burners but 'm not sure what to make of having the oven vents at the front of the stove under the control panel.

    Nothing Left to Say thanked jwvideo
  • 11 years ago

    I believe the Bosch Benchmark induction slide-in also designed to take up the whole cubby without need for a counter piece against the back.

    Nothing Left to Say thanked steph2000
  • 11 years ago

    Most Induction Slide-ins are now "freestanding replacements", meaning they fit in the same space and do not use a rear counter top filler. This includes the model from GE, Samsung, Bosch, Miele, KitchenAid, etc. The only difference between those is some have the top glass that extends slightly on the sides that rest on top of the counter filling the gap (GE), while others do not extend and there is a slight gap (like with a free standing range).

    Nothing Left to Say thanked fauguy
  • 11 years ago

    When we bought our GE slide in range to go into a standard 30 inch opening on existing cabinets, it was no problem. We were getting new granite. Most of them have a 3 inch (approx.) piece of counter across the back. The GE happens to have its own little back filler with a vent and we didn't need the granite piece. However we had our fabricators cut us a piece just in case our range ever breaks down and we go with a different brand that does need it. If you tile down evenly with the rest of your back splash and save a piece of marble, you should be good to go.

    Nothing Left to Say thanked silken1
  • 11 years ago

    Most Induction Slide-ins are now "freestanding replacements", meaning they fit in the same space and do not use a rear counter top filler.

    Yes, but maybe someone should point out that that often just means that they give you a matching filler as part of the deal. Samsung, for example, touts their ranges in a big way as freestanding replacements, but watch the first 35 seconds of their installation video (scroll down to see it):

    http://www.samsung.com/us/appliances/oven-ranges/NE58F9500SS/AA


    Nothing Left to Say thanked writersblock (9b/10a)