Software
Houzz Logo Print
suburbanmd

Setup for Asko Pro Series washer

11 years ago

Here's the spot in my basement prepared for the Asko Pro Series W8844XLW washer. Note the outlet on the right with orange cable; that's the 20 amp 240V outlet that the Asko should plug into. The top slots are each 120V, with 240V difference between them because they're opposite phases. The bottom slot is a ground. There's no neutral like on a dryer outlet, so there are no 120V components in the machine; everything runs off 240V.

I ordered the machine today from the second of the two dealers whom I contacted. The first dealer made it a bit too obvious that he didn't believe I was serious about buying. The machine was in stock in mid-summer, but now I have to wait until sometime in October.

Disappointment about pedestal: Both dealers quoted a pedestal, or platform as Asko calls it. But when I followed up with the second dealer today to order, he double-checked and found that the only available platform is for the smaller "family size" washer. I don't think this corner of my basement has ever been wet since we moved here 16 years ago, but I'd feel better if the machine were raised off the ground.

Comments (20)

  • 11 years ago

    You pulled the trigger. WOW, congrats. Asko XLW and Miele Little Giant are my dream washers, and I think the quality, build materials, temperatures, cycles and water usage options make these 2 units near perfect machines!

    Mid October? Wow, that is a long wait!!

  • 11 years ago

    You could build a masonry platform like Larsi has. See her pictures in another thread.

  • 11 years ago

    See HIS pictures in another thread. LOL Thanks Poppy! ;)

  • 11 years ago

  • 11 years ago

    Well, "pulled the trigger" is overstating it. I would have signed an order and paid a deposit if asked, but the salesman just took my name and address and phone number, and will get back to me when the machine is in. I have committed money in other ways, namely the new Zoeller basin and pump under the sink, the new faucet and washer hookups, and of course the new 240V circuit. I paid the electrician extra to wire it with cable suitable for a 4-wire 30 amp outlet, so it could handle a Miele in the future. But I'm set on getting the Asko now. It's been a long process so far, so the wait doesn't bother me much.

  • 11 years ago

    The washer came in earlier than expected, and my delivery is scheduled for Thursday. I'm going to ask them to place it on this pallet, hopefully near the edge. It was used to ship ceramic tiles and is rock-solid.



    Re size, the Asko Pro Series is being promoted as 2.83 cu ft. But the recently-added entry on the Energy Star site says 2.7 cu ft. What's more, the info sheet I've been looking at for months (have my notes scribbled on it) says "Drum volume: 77 l" under Technical Information. This also translates to 2.7 cu ft. This realization made me nervous about size, so I went back up to the showroom with a couple of our larger comforters, like this:



    I was surprised to find it easier to get them into the Asko, compared to my slightly larger "big" Miele. The Asko doesn't have a rubber boot to get in the way, just a slim gasket.

  • 11 years ago

    Not having a rubber boot is really cool with the Asko. Love that. I do however wonder if it's so great not having the rubber boot as Asko promotes...why do other brands, especially Miele or Bosch not follow suit?

  • 11 years ago

    Congrats on the new washer.

    I don't know about the whole boot non-boot thing.

    I think Asko has used this type of system (door is part of the tub design that floats with the machine, not part of the frame that is stationary) for a very long time.

    The only disadvantage that I could see is fingers can get pinched between the washer and it's cabinet when the washer is working.

    Otherwise it's a smart design but I don't know why other manufactures don't follow this type of set up.

    I'm showing this video so people can see how Asko does not use a traditional boot and that the door is attached to the drum.



  • 11 years ago

    Maybe Asko has a patent on the design in some country?


    Is Asko also the only FL maker to use flat glass on the inside of the door?

  • 11 years ago

    I wish someone would make the perfect machine... Give me the 240v and temperature control of the Asko along with the larger drum opening and larger drum diameter of the Miele W4842.

  • 11 years ago

    The 20 lb. Miele Professional Octoplus washer seems to fit the bill, but Miele won't discuss installing it in a home. Hard to even find out what it's capable of doing, because the online manual refers to a separate "Commissioning" manual which Miele isn't inclined to give out.

  • 11 years ago
    last modified: 11 years ago

    V-Zug in Switzerland makes amazing machines, but not for sale in the USA. As suburbanmd said Miele Octoplus seems perfect (look at them, it seems they even use the same doors from the Miele W48xx and T98xx units)..they are big, professional internal heater and built like tanks.

    Honestly though, the Little Giant (PW6065) is handling everything my Miele W4842 and Electrolux 4.3 cu ft machine did, and the level of control and settings are out of this world...5000W heater too ;)

  • 11 years ago

    Whirlpool_trainee....WOW, this manual sounds like it is for my Little Giant PW6065. This is for the Octoplus? Every option, feature, setting is identical to my machine!!

  • 11 years ago

    Yes, they are fairly similar indeed.

  • 11 years ago

    Similar like the owners manual for a Mercedes AMG C-class is similar to that for an AMG E-class, perhaps? The Octoplus has what I imagined would be the real draw, the ability to add custom cycles. Details aren't fleshed out in the manual, though. Something about adding "wash blocks". Hopefully you can choose wash rhythm and duration. Specifics about rinse cycles aren't clear either.


    Octoplus manual is also missing a "Program sequence" chart like in the Little Giant manual, which might help you tell if, say, the fire protective clothing cycle is worth trying for something more mundane.

  • 11 years ago

    I have no idea about cars, so... what? *lol*

    If you want to get extra fancy, you need one of the larger Pro models with around 200 possible custom cycles, optional suds saver, build in scale...

  • 11 years ago

    Little Giant...you can add programs, and create custom programs and save them. I'd say the Little Giant and OctoPlus are like comparing an E63 and S63 AMG ;)

  • 11 years ago
    last modified: 11 years ago

    Ummm...YIKES! AMG's (S63) go for $143,250 and the E63 $101,700.


  • 11 years ago

    In the Little Giant manual I do see the ability to customize an existing program to create a new one: "Change one or more components (program name, temperature, spin speed, pre-wash)." The Octoplus manual says you can add one or more "wash blocks" to a custom cycle, but doesn't say what they are.