Software
Houzz Logo Print
sc77

Lawn Delete, New Conifer Bed Help

11 years ago
last modified: 11 years ago

I've been collecting conifers for a couple years now, and the collection is slowly starting to expand. I am forward thinking about where I will locate a lot of the small BP & 1 gal plants I am currently growing. I know I need to design a new bed to house these plants, but am struggling with the shape(s), number of beds, location...

Id like to leave a pathway of grass between the large existing bed next to the driveway and the new bed. I'd also like to try and incorporate the rock in the center of the front lawn if possible, no chance of relocating, too large. The bed needs to be at least as deep into the lawn as the rock, or it will not get full sun.

Up until this point I have been planting in the existing beds or along the perimeter of the property, this will be the first "floating" bed.

Lots of pictures to help with perspective, can't take aerial shot, tree canopies block the view. I drew a rough map of the lot, which is just under 1/2 acre, and a mock of of where/what the bed maybe could look like. Maybe multiple small mulch circles would be better, not sure.

Some additional perspective. Along the sidwalk, the frontage is about 70ft, and going back the side mulch bed is 120ft.


Hopefully you can make sense of the lot with these pics.

Thanks,
Shawn

Comments (13)

  • 11 years ago
    last modified: 11 years ago

    Hey Ken - push mower, the trees in front are maples, probably have massive root systems, so a raised bed may be required. They are on the north side, so no issues with shade.

    Soil type is a fast draining silty soil, New England (MA).

    Maybe I need to actually put the diagram of my lawn on grid paper with proper proportions, It difficult to tell how much space is there, based on the photos... To make the bed, I will solarize the grass next summer, clear poly, sun/heat/no oxygen = dead grass, dead weads... fresh start. Takes about a month or so to do.

    Thanks for that link, I read it a while ago, but was good for a fresher. I'm good on the concepts of making the bed, just stuck on the shape/location and how many. I think I would like the beds to be somewhat narrow to allow plants to be viewed from all sides and not have anything get hidden in the middle... but beyond that, not sure. Maybe I just need to get the hose out and start building some shapes until something looks reasonable...

  • 11 years ago

    that is what you want to do,,,use hose ,,,don't go to crazy with inside bends,,hard to mow

    why not also expand beds from left

    does house face north ?

    ron

  • 11 years ago

    Thanks Ron, yep, the house faces north so I have limited full sun locations. I am removing 3 large oaks on the south side of the property (maybe next spring), so that may create new options for me, but right now, that area in the middle of the front left side of the lawn is ideal for sun.

  • 11 years ago

    except you don't get much morning sun , do you ?

    making new beds is exciting,,,they are never big enough

    I think I've killed 10,000 sq ft of grass over the years

    ron

  • 11 years ago
    last modified: 11 years ago

    You are correct, when the leaves are out, the morning sun filters through, but is not direct/full sun. However, the shade is 100% deciduous, so the site peaks at about 10+hrs of direct sun in late spring, before the leaves arrive. During the summer it does miss the direct sun in the morning, but gets full intensity sun for about 6-8hrs from about 11am til sunset.

    I observed my sites for a while, but I like real data, so I rigged up this analog solar clock, that only records time when the sun intensity is strong enough to power it. I take recording around the yard at different times of year, so I'm really getting a clear picture of where the sun is best, when, ect. Here is where I got the idea:

  • 11 years ago

    Does it differentiate the difference between morning sun and afternoon sun? In some cases that's important.

    Mike

  • 11 years ago

    Hey Mike, nope, it's not that sophisticated, but it does take fairly intense sun to power the clock. I guess the biggest learning for me, was how variable different spots are during various seasons. There was an excellent article in the Winter 2014 Conifer Society quarterly about Appreciating Conifers in Shade where the writer/property owner talks about how it took him a full year to accurately gauge light patterns due to daylight hours, sunlight intensity, and the sun's location. For example, the sun gets up really high above the house during the summer, and my 'Gold Drift' gets a tremendous amount of sunlight (for my yard). I recorded 11h 50min of sunlight on June 7th, but on Nov 19th of last year I recorded only 4h 20min... Both days were sunny and clear.

    Much like the author of that Conifer Quarterly article, my property is surrounded by many large trees, many of which are not on my property, but shade my yard... So I have to be strategic about the placement of my conifers. Also, I'm an IT geek, so this stuff is interesting for me... I like data!

  • 11 years ago

    maples, probably have massive root systems, so a raised bed may be required. T


    ==>>> and that was the biggest mistake i ever made .. the mature maples grew up and into the new soil inside one season.. and choked out just about everything i planted in it ... and that is why i asked ...


    bare root plant.. dig hole.. plant in native soil ... after first deep watering in.. never water just the plant again .. and never fert the plant itself...


    doing any of that.. will call the M roots to the hole.. with your prime plant in it ... and the maple will win the dominance competition ... hands down ...


    and dont even get me started on cutting off the sod .. to make a bed ... you will be cutting off all the shallow maple roots in the first inch or two ... and the M will respond by replacing every ONE feeder root... with two feeder roots ...


    and that is why i showed you.. .in the link.. how to RU the grass.. and simple cover it with mulch ...


    ken

  • 11 years ago

    Sean, looks like I'm late to the party, apologies.

    I would keep the shape simple with a few curves for interest, otherwise it might become a distraction from the plants. Here's a photo which someone recently posted on FB, which is an example of the look I'd go for in your situation. (Granted, it will take many many years for the plants to achieve the type of maturity we see here). Note the simplicity of the shapes of the beds.

    I would agree with Ken's comments about staying away from your native maples if possible (this is not critical but I think it would be preferred). In your situation, my tendency would be to extend off of the house rather than the perimeter or creating new island beds, presuming you're planting slow-growing plants and so long as it fits in with your areas of sun.

    The house can function as a moderating hub, providing some protection from wind and cold in the winter, and potentially from too much sun in summer. The eastern side of the house is great for those sensitive plants, make good use of it if you can. Another consideration for me, the deer, rabbits, and stray cats which like to eat, buckrub, and even dig up plants tend to stay away from the house so that's another potenial plus.

    You can see how this can work in the photo above. The obvious downside is, if you don't want to see the house when you're looking at your plants. But I think it's a good place to start and then build out from there - that has been my approach.


  • 11 years ago

    Thanks Alex. My yard is not conducive to being obsessed with sun loving conifers...So, I have to select my locations and cultivars very carefully. This new bed would house those for which full sun is a must. You will see in my aerial shots below, that I am surrounded by huge tree canopies, some are on my property, others are from other yards.

    This basically gives me a small triangle of full sun locations to choose from, that is why the bed location is very specific and will most likely float with a pathway between the existing bed and the new one.

    Wow, I missed that photo on FB. Those bed designs are exactly what I was envisioning... but I will never have the pruning/artistic skills to develop such an impressive combination of plants. Either way, still helpful for envisioning the shape of the beds.

    Here are some aerial shots to help visualize the situation.

    Red triangle shows full sun areas. with proposed bed falling into that zone. It should be about 15ft from the base of the two maples... not as far away as I would like, but I am obviously limited.

  • 11 years ago

    Who's garden is that, Alex?

    Dax

  • 11 years ago

    Appreciate it, Alex.

    Sorry to have disrupted your thread sc77.

    Dax

Sponsored
High Point Cabinets
Average rating: 5 out of 5 stars21 Reviews
Columbus' Experienced Custom Cabinet Builder | 4x Best of Houzz Winner