Thank you for your inquiry. The depth of the custom double sink cabinet is 24". This depth is the same depth as kitchen cabinets. You can still achieve the stacked drawer look with a depth of 21" if your space is limited.

There are no drawers located directly below the under mount sinks. It is just a false drawer front. However, the top drawer in between the two sinks is operational.

The sinks that I specified are Kohler Verticyl #K-2882.

Please reply with any additional questions and I hope this info helps.

Thank you so much for the prompt response!

Another question...the top drawer of the bottom two, did it need to be shallower (from front to back) to allow space for the p-trap? The cabinet maker I have been talking to is saying it would have to be.

We are looking at having a 36" tall vanity that will be 21" deep. I really love the full-overlay drawer design. My shower and vanity will also be Fantasy Brown! You can see why your design caught my eye!

Thanks again for your assistance! Love, love, love your design!

The middle drawer is full depth, which is typically 3" less the cabinet depth. The drawer box is then custom made to fit around the p-trap. You should note that both water lines and drain height usually needs to moved if you plan on maximizing the storage.

What is the width of the cabinet that you are having made? The reason I ask is that there could be an opportunity to have small top drawers on either side of the sink.

We can make the vanity up to 95" long. I am thinking of putting towers on each end where you have the narrower sides.

This is such a clean and unique design! Thanks for your prompt responses.