Software
Houzz Logo Print
loves2read

Need to replace raised dishwasher--choices?

10 years ago

The dishwasher in our house is original--probably 10-12 yrs old. We have been here 6 yrs. Have had a couple of repairs including the straps for the door which have broken twice because this d/w has a wooden panel to match cabinetry and is very heavy. The front faces into kitchen area--not visible really from any place outside --so considering not reusing wood front for new model--might not fit anyway depending on model.

This one is KitchenAid Signature--not sure model #.
It was installed raised to fit in kitchen island/bar with double sink in center and bank of drawers on opposite end...
Bottom is raised about 8-10 inches above cabinet base.
We would need replacement to be installed same way.

What considerations/physical characteristics do we need to take into account to get a model that can be installed fairly easily, without connection problems?
Right now this model has done good job--fairly quiet and cleans well, has heated dry which works well...but not tied to any brand at this stage...We also are just a couple (not large family) and run it maybe every 3 days depending on use. But we are considering putting house on market. With my luck, the week that we do, the D/w is likely to go out. So this is gathering info for future need--not mandatory replacement.