Software
Houzz Logo Print
bert_morenstein

5-1-1 and Promix?

9 years ago

I finally found some pine bark fines. Its really graded as 1/2 inch by Jolly Gardener. It should be ok for my tomato containers. The peat base I am using is ProMix HP, which already has perlite. So instead of a full part should I cut it in 1/2? Besides lime what other micro nutrient products should I include? thanks


Comments (6)

  • 9 years ago

    What's the ratio of peat to perlite? The bag may say, but post a pic if you aren't sure so people can tell by what it looks like.

    If it's 50/50 peat and perlite, use two parts mix to five parts bark. If not, you'll have to add enough perlite to make up the difference. If there's just a little perlite in the mix you should act like it's all peat, with a ratio of five parts bark, one part mix, and one part perlite.

    Foliage Pro has an excellent N:P:K ratio along with all the necessary micronutrients. I didn't use a slow release fertilizer in my mix because I use a weak solution of FP every time I water, and I can't remember which micronutrient products people use if they're not using FP, so hopefully someone else will pipe in.

  • 9 years ago

    ProMix HP is +/- 30% perlite. Just enough to question whether to adjust or just leave it alone. I've used Osmocote in the past with good results. I p;lane on getting Texas Tomato Food this year. I don't know if it has all the micro nutes I want


  • 9 years ago

    Are your pine bark fines 1/2 inch and bigger, or 1/2 inch and smaller?

    My understanding is that perlite's main function in 5-1-1 is to create voids by separating the bark pieces, which reduces water retention (and explains why people like coarse perlite). I'm not sure which side of 1/2" your bark is, but if your bark has very little in the dust-to-1/8" range I'd suggest 5 parts bark to 2 parts ProMix. If it has lots of particles smaller than 1/8" I'd recommend adding more perlite so the peat won't fill up all the voids--especially if the peat is made of fine screened particles too.

    I lean toward staying close to the recipes because I'm pretty new to all of this, but someone who has more experience with how the soil components work together may think it's not that big a deal. We'll see if anyone else pipes up.

  • 9 years ago

    I wouldn't adjust the ratio.

    Just use the Promix as if it were the "peat" fraction of the 5-1-1.
    A little extra Perlite won't hurt anything.

    Josh

  • 9 years ago

    its probably best to stick as close to possible to the original recipe, and do 5-1-1. you might replace a small amount of perlite with the promix Hp. even if you did go straight 5-1-1 you'd only be having the a little more perlite. as long as the perlite is >1/10in you'll get slightly better drainage w slightly less water retention.

    FP seems like a popular choice since it has a good NPK ratio and micronutrients. that Texas tomato food seems to advertise itself as not requiring other nutrients so you may not need to add micros