Software
Houzz Logo Print
tigerlily37

Silestone quartz counter price, what do you think?

9 years ago
last modified: 9 years ago

Hi everyone. I received a quote for my kitchen for the countertops and want to know if this seems right. I know quartz is expensive so maybe it's not bad, I don't know. Here's what they have:

2 - 3cm silestone pulsar suede or polished 2 $2,731/each = 5,462

1 87 sq. ft. stone labor 3 cm 1 $34/sq. ft = 2,958

1 cutouts large undercount stone 1 $175 each (this was for undermount sink but was later changed to cut out for a farm sink so don't know that cost will be same now)

1 cutout cooktop stone 1 $75 each

subtotal = 8,670

tax = 457.44

non-taxable subtotal = 3,208.00

Grand total = $9,127.44

At first the fabricator said I needed 2 slabs but now they think I might need 3 slabs. So this quote may very well increase by $2,731 if I need 3 slabs.

It doesn't mention drilling holes for the faucet, etc., but there will be 5 holes there.

Right there above the sink, it doesn't show it, but there will be a quartz ledge there, about 54' x 11"

Installers, fabricators, does it look like I'll need 2 or 3 slabs? Is the price on target for Silestone pulsar?

Thanks.

Comments (7)

  • 9 years ago

    Hopefully someone will have better advice but I would definitely get another quote since you're talking almost 10k. Since quartz is manmade it should be easy to find either the same slabs or something very close (but maybe by a different brand of quartz).

  • 9 years ago

    You are coming out right about $100 sq/ft + tax. That's in the right ballpark, you might do a bit better (or worse) by shopping around.

    Briana Johnson thanked DrB477
  • 9 years ago

    Thank you all very much for your responses. Featherbee and DrB I think getting one more quote is a good idea. It can't hurt anything. I told our contractor today I was thinking I might get another quote.

    KitchenPlace, thank you also. It might get me if I have to go up to 3 slabs because I'll have to purchase it all of course but then I'll have extra to go up the wall behind the cooktop. I'm trying to see the silver lining if I have to go up in price!

  • 9 years ago

    My kitchen is big, but that seems rather high. I'd get several other quotes. You can call and say how many square feet you'll need and get a quick estimate over the phone.

    Briana Johnson thanked User
  • 9 years ago

    I looked the quartz up online and could not quite tell from the pics, but it seemed to me that some care may be necessary to get a good seam . It doesn't have a large pattern, but the colors do swirl around and make a larger pattern. Will they need more material to make a good seam? It is a lovely choice.



    pic of slab (sorry for the blur) ?

    Briana Johnson thanked jhmarie
  • 9 years ago
    last modified: 9 years ago

    Yes, that's it, thank you jhmarie. I talked to this fabricator today he mentioned the exact same thing you did. He said it was more than just square feet needed and it depended on how many seams I wanted and where they were - so I may want to go to three slabs for that fact. You are totally correct.

    Nicole, I agree. I have found another place that's highly recommended been in business over 30 years. I'm going to get a quote from them too.