Software
Houzz Logo Print
ryan_hoenle89

Question about quartz surface and samples (HanStone vs Aurea)

9 years ago

Long story short: We're going with Grey cabinets, semihandmade doors and a completely white (or white-ish) quartz countertop.

I have a good size sample of the Lincoln from Aurea Stone along with a number of other samples from multiple vendors. Is it safe to assume that the surface of the sample is going to be indicative of the surface received when ordering a slab?


My wife and I love the white color of the Lincoln as well as the subtle veining (much better, IMO, than the veining on other "marble look" quartz we've seen from other vendors (MSI, Hanwha, Silestone, Caesarstone, and LG, so far), many of which look at least slightly dot matrix-y or digital (For lack of a better term)


What we DON'T like, and I'm hoping the attached photo makes it clear, is the surface of the Aurea Stone itself. In this respect, the HanStone surface is vastly superior (at least aesthetically)


The HanStone surface is actually smooth, and nearly perfect, both visually and to the touch. If you run your fingers across it, it's a smooth surface. This is not at all the case for the Aurea Stone Lincoln sample we currently have in our possession. Note that I've taken a photo at just the right angle to highlight this issue. It's not always visible from every angle and not in every light, but it can always be felt, especially if you run your nails across the surface. It is also not a spottiness in the coloring but actual.. hmm.. let's call it crazing (although I'm sure that's not the right term here) on the surface of the material. It's rougher and the difference to the touch is considerable.


Just hoping someone more knowledgeable than I might be able to chime in on what I'm seeing and feeling here. Is it possibly an issue with the sample? Does anyone on this forum already have Lincoln installed and might be kind enough to send over a couple shots from a similar angle?


Thanks so much! Any insight is greatly appreciated :)

-Ryan


The HanStone sample is sitting on top of the Aurea Stone sample in this photo.



Comments (5)

Sponsored
Miller Woodworks
Average rating: 5 out of 5 stars23 Reviews
Franklin County's Trusted Custom Cabinetry Solutions