Software
Houzz Logo Print
thesculptor

Washer & Dryer - front load, HE, durable

9 years ago

Seeking high quality machines with a 36" top work surface and controls
at rear. Not interested in steam or other trendy functions. Gentle on
clothes while doing an excellent cleaning job are the priorities.
Trouble free reputation. Controls can be mechanical. The door should
hinge R.

We are a couple and a dog, rarely do huge loads, but like the ability to wash blankets and dog beds. Would prefer to spend under $2000, but that isn't an absolute. Recommendations?

Comments (9)

  • 9 years ago

    I don't know about size but when you say high quality have you checked Miele?

    Jan Heginbotham thanked mamapinky0
  • 9 years ago

    Thanks. It was on my list when still planned to put them under a counter. Have now decided that isn't a great idea. So, since plan is to fold on top of units, would rather have controls at back (like old-fashioned machines) to keep things from falling behind. Miele is also small and expensive; not totally rejected, but leaning away from that set.

  • 9 years ago

    You need to make a few more decisions before I could make some suggestions. For example, definitely front loaders or top loaders. I inferred FL from your post. How big is the dog bed? Be aware that all washers are subject to government low water and water temperature regulations for energy efficiency. Who provides the best repair service in your area? Any brands that don't have local service?

    Your preference for controls on the back is easy for a dryer but may not be for a FL washer. Do your units have to match?

    What are your current machines or what are you used to? Willing to try something different that may have a learning curve?

    Most large blankets and pet beds need a washer larger than a residential miele the little giant excepted.

    Jan Heginbotham thanked poppy214
  • 9 years ago

    Definitely a FL. The dog beds I wash are not large, mostly bed covers and a few moderate mats. Yes, the units should match....unattractive, and hard to fold on top when they don't. We are living with temporary things for now, had old Maytag Neptune set which was OK, though the need to keep washer open wasn't great. The washer died, and I bought a cheap GE topload HE....it washes well but is definitely beating up our clothes more. No center post again. Have been told that TL w/o posts don't work well, so definitely want a FL.

  • 9 years ago

    Agree with you on the TL GE. Awful.

    You would likely want a 4.0-4.5 Cu ft machine. This is a typical residential washer across all brands. I can't recommend Samsung due to build quality, parts availability, and poor customer service. However, I know there are many who love their Samsung machines.

    Maytag and Whirlpool are made by Whirlpool. Insides are virtually the same. LG makes most of the residential Kenmores (Sears). Electrolux is popular, but make sure you have reliable service (not available where I live).

    You said you don't want steam, but did you know that the "steam" in a washer indicates the presence of an on-board heater that boosts the water temperature above 120F. If you want a true hot water wash, you need an on-board heater. Sanitize cycles based on heat must raise the temperature above 150F. It doesn't matter what your water heater is set to, the washer will adjust the incoming "hot" to meet the brand definition of "warm" or "hot". Warm is tepid IMO. Hot is warm. YMMV. All rinses in all machines are now cold.

    There will be other cycles you care about more than I do. I have pets and sick people so need that thermal sanitize cycle. I've been very happy with my LG built Kenmore. No repairs in 3 years (knock wood) and nice clean clothes. Please ask questions. There are lots of members here with different machines and lots of experience.

    Jan Heginbotham thanked poppy214
  • 9 years ago

    If I had to get something besides my beloved and Cherished Miele washer & dryer, I would probably only consider the Whirlpool Duet or Electrolux units. IMO, they are both excellent brands, good build quality, easy to use, fun to use ;) and reliable!!

    Jan Heginbotham thanked larsi_gw
  • 9 years ago

    I've had Miele, Bosch and Asko over the years. Used Whirlpool at my sister's. Miele is #1 hands down and if it wasn't just me now I'd go for the Little Giant next time around. But those are a certain size. I don't need a bigger machine. If the Duet passes @mamapinky's precise and knowledgeable demands, and I needed a larger washer, I would do with that. Electrolux gets high marks -- Cedric has a beautiful pair.

    Jan Heginbotham thanked rococogurl
  • 9 years ago

    The only front-loading residential machine with controls at the rear are Speed Queens. Very good build quality but lacks a heater for boosted wash temps. You can get a true hot (water heater temp) wash on some cycles.

    Jan Heginbotham thanked littlegreeny