Kobe has some you might look at.

Thank you, I’m concerned about the Venta hood only being CFM 250 and 375 equivalent.

You’re fighting two tough specs, the 8” max and the 6” vent pipe. If you can open to a 8” pipe and 9” tall hood, you have a world of options.

I had a 6" height restriction and venting issues as well as requirement of twin fans for a 1000 cfm. Imperial hoods (manufactured in California) met all of those criteria plus additional custom features. I suggest you call the the manufacturer direct with your questions. The office folks know a great deal but will send you to their engineer if stumped. You might also try the appliance forum for assistance.

Less than 3" height, 6" duct, 750 CFM.

kobe-ra3836sqb

Thank you, everyone is wonderful on this forum. What do you think about reviews on imperial versus Kobe?

Have you looked at Miele built-in hoods such as model DA 3496?

That Kobe's not a 3", it's over 15" with 3" visible. So if you have the cabinet to bury the guts of the blower, then that might be a good way to go.

I did all the measurements, I’m concerned about the Kobe insides also. Concerned now about the Miele fitting. I’m going to make a call to imperial today. Thank you all again