Software
Houzz Logo Print
lncarrozza

Acceptable tile job?

8 years ago

Hi,

My contractor tiled our fireplace surround and it turned out a bit rough in my opinion.

Is this an acceptable job or should I have it redone? Thank you!

Comments (36)

  • PRO
    8 years ago

    Has he grouted the tile? It looks like there are some joints that don't have any grout. That should help some if he hasn't done it. If he has, then YES, it's a pretty rough tile job.

  • 8 years ago

    Hi, hasn't been grouted yet. I'm wondering if I should let him grout it or have it redone by a tile professional?


  • 8 years ago

  • 8 years ago

  • 8 years ago

    So the person that set the tile is not a pro? If you are going to use dark grout its not gonna look good, light colored grout maybe.... I just looked again, get a pro to redo.

  • 8 years ago

    No no no NOT OK!! That bit over the corner of the fireplace is terrrrrrible.

  • 8 years ago

    No, it's not even and then added little cuts to make up for it being misaligned.

  • 8 years ago
    Please have someone else start over. It will not look better after grouting
  • 8 years ago

    Definitely have someone to do it properly.

  • 8 years ago
    Yikes! You know what it reminds me of? What my hair looks like when I try to French braid it myself. I'm just no good at it. I can French braid other people's hair beautifully but when I do it on myself I miss chunks, it's all uneven, lumps of hair stick out weirdly, and then it's all wonky and sideways and it's evident that my arms got tired very soon after starting. LOL!
  • 8 years ago
    last modified: 8 years ago

    the top pic shows how he stuck in extra pieces and screwed up the pattern. he did it out of order, got messed up and had to improvise. badly.

    look closely. its bad. as are his cuts. this is unacceptable and i would not pay him.

    ok..got it. look at this pic and the top one of yours. see what he did at about 1 o'clock on yours?

    how cuts should look. nice and even on the edges

    if doing the hearth, try and get a solid edging piece like below

  • 8 years ago

    He also messed the pattern on both sides of the hearth. Below the strip just outside of the fire box it goes down 2 tiles and then back up.

  • 8 years ago

    Complete disaster.

  • 8 years ago

    Thank you all for solidifying what I believed to be true. I will have it redone for sure.

  • PRO
    8 years ago

    If you're going to have it redone, select another tile. That tile looks like bathroom tile and is very difficult to set. Use solid stone slabs for a more simple classic look.

  • 8 years ago

  • 8 years ago

    Diana, this was one of my inspiration photos. Here is what mine looks like from afar:

  • 8 years ago

  • 8 years ago

    Still think it should change? Thanks!

  • 8 years ago
    last modified: 8 years ago

    I actually like the tile you chose...the installation quality, of course, not so much. ;)

    There is something else that’s not quite right, though, and that’s the stained wood piece sitting on the mantel. There’s a redundancy there.

    But I like the overall feeling of the room (or what I can see of it, anyway!)

    Edit: I’ve changed my mind regarding the tile choice and agree with Dana that slabs would be better, but it’s for practical/functional reasons rather than a purely aesthetic one. Even though you’re using gas logs, the illusion is that it’s a traditional wood-burning fireplace, where logs can and do spill out onto the hearth. And it’s for that reason I think slabs would be a better choice. (FWIW I have a wood burning fireplace with marble surround and hearth, and if the hearth had been marble mosaic tile instead of a thick slab, I’d have several broken/missing tiles!)

  • 8 years ago

    Thanks, Sammy. We liked the beam to tie in with the wood components in our new kitchen. Any suggestions on how to make it not look redundant? Thanks!

  • 8 years ago
    last modified: 8 years ago

    The easiest thing to do would be to replace the beam with a stained piece closer in thickness to the mantel shelf in your inspiration pic (and your kitchen shelves, actually!) That’s where the problem lies, IMO, with the thickness.

    This is closest thing I can find that illustrates my idea (I’ll keep looking, though!):

  • 8 years ago

    Too many lines. Get rid of that tile and the shiplap. Brick would look far better there. The whole house needs additional warmth that natural warm tones materials bring. Like brick, and brass, and wood.

  • 8 years ago

    Can't stand that tile.

  • 8 years ago

  • 8 years ago

    I really like the tile and plan to keep it, just have it redone. Above are two more pictures we based our design on. We will bring in warmth in the furniture and fabrics in the room.

  • 8 years ago
    I like the tile... it'll look very pretty I think once it's done by a sober person. I'm sorry you have to go through the hassle of getting it redone and I hope you aren't the one that has to eat the cost of the replacement tile.
  • 8 years ago

    Thank you skmom. It has definitely been a learning experience on our part. Just looking forward to having everything done (correctly) so we can stop worrying about it all.

  • 8 years ago

    I'm actually installing this tile in our bathroom right now and while i am not an experienced tile setter i still would not have laid the tiles down like that because once you see two tiles laid side by side when it should it have been offset, you will never unsee the flaw. I feel like it should be corrected.

  • PRO
    8 years ago

    If you like it, you like it. I will disagree, even after seeing your inspiration photos.

  • 8 years ago
    last modified: 8 years ago

    Total amateur job. Did you pay amateur or "PRO" price? And just because somebody is a "contractor" doesn't make them a "PRO".

  • PRO
    8 years ago

    Let him finish before you judge it. If you don't like it then have him redo it.

  • 8 years ago

    Just a bit of warning. I used marble tile around my fireplace, and when an ember fell out of the fire box, it left a burn mark on my marble tile hearth. I took to keeping a sheet of aluminum foil over the hearth to protect from burning embers.

  • 8 years ago
    last modified: 8 years ago

    Look what I just found on another [Houzz dilemma[(https://www.houzz.com/discussions/how-to-add-interest-to-living-room-wall-with-fireplace-dsvw-vd~5330655?n=26):

    An example of the stained mantel shelf I suggested on a fireplace very similar to yours. :)

  • 8 years ago

    I like your tile a lot (especially when it's so far back you can't see the mistakes).

    I do have to side with Sammy about considering reducing the thickness of the mantel shelf if you can.