Software
Houzz Logo Print
zach_proczak

Top of stairwell banister

8 years ago
Hey all.
Just bought a house and one of the biggest concerns we have at the moment is the banister at the top of the stairs is extremely short! I didn't get exact measurements but you can see in the pictures it's tiny. if I remember correctly it barely comes up to my knees.
We have four kids, two of which(ages 8 & 4) we feel might tumble over or climb on and fall.

Is there anything we might be able to do or add on to to add some height to it?
She was thinking of possibly adding and securing a kind of bookshelf/cubby hole unit to the top of it to make it taller which I don't think is a bad idea.
Butt does anyone have any other suggestions or ideas.
Definitely don't want to have to tear it down and build a new one. But if that's the only option then so be it.

Comments (18)

  • 8 years ago

    There is no good way to make that meet code. Reconstruction appears to be the most reasonable course of action.

  • 8 years ago

    In my opinion that is not worth the safety risk. I would remove it and put in something up to code.

  • 8 years ago

    Maybe have a carpenter take a look...perhaps remove the top rail, add longer spindles, and reattach top rail...Good luck!

  • 8 years ago
    last modified: 8 years ago

    How odd. I'd love to hear the story of why they built it that way. Is there anything else odd about the house?

  • 8 years ago
    @tqtqtbw
    there are a few oddities.
    A cool one being that this house has a "lift/elevator" in it.
    it's not very big... no wider than a mail slot.
    but it goes from the first floor to the second floor with a small 1/4 hp motor in the attic where all the pulleys and belts are located.
    It's definitely interesting.


    picture was meant to be of the floor but you can see the "shaft" on the wall...
  • 8 years ago
    last modified: 8 years ago

    Nicely done...and completely unsafe. The simplest thing to do is leave it in place and have a competent carpenter build an extension on top of it that matches what is there exactly. I'm guessing that a set of spindles and a cap that are a little shorter than the height you have now will get you up to the code requirement (which I believe is a minimum of 36"). If it's stained to match, it would fit in esthetically and not require as much work as tearing out what is there and starting from scratch.

  • 8 years ago

    Holy cow. I wouldn't let adults, much less children, enter this house until the stair rail was reworked, brought up to a safe height and conformed to code. Ditto the unprotected lift opening. Why in the world didn't you demand these issues be taken care of before you bought the house?

  • 8 years ago
    the people before us had small children as well. we Just want to find some solution to heighten or add security to that rail.

    as far as the lift thing goes... nobody, including our inspector, said anything about it. it's inoperable. if anything we're going to patch over whatever opening there might be or hide it.
    but nobody is small enough to fit in it... my biggest concern would be toys being stuffed down it -.-
  • 8 years ago

    I suspect the reason why the rail is so low is for the purpose of moving furniture into and out of those rooms close to the rail.

    For that reason, I would design whatever replaces it to easy to unbolt & move out of the way.

  • PRO
    8 years ago
    Beautiful woodwork though...
  • 8 years ago
    that's what we thought too. So low to help move furniture upstairs.

    n Yes it is beautiful woodwork which is why we'd hate to tear it down
  • 8 years ago

    That's a terrible unsafe railing. Too short, and the flat top is both ungrab-able in emergency and too tempting to climb on. Inspector would fail it for sure. It should be completely redone.

  • 8 years ago
    inspector didn't say a word about the railing.
    He pointed out a few other little things around the house but no mention of the railing.
  • 8 years ago
    Have someone check out the dumbwaiter shaft for fire safety while you’re at it. You don’t want something to spread quickly up from the 1st floor.
  • 8 years ago

    OP - Not a home inspector, a proper building inspector for construction who is concerned with code and safety.

  • PRO
    8 years ago

    Get a metal fabricator to fabricate and install a wrought iron extension that will bring the rail to 36". It will be more cost effective than wood replacement, incredibly strong, code compliant, match your original door hardware, and preserve the original building fabric.

  • 8 years ago
    Wow, Cool house! Is this the room with the dumbwaiter/lift? By the looks of the wear on the floor, it sure looks like a lot of foot traffic in and out of there!
    Reminds me of my best friend's old house in small town Ohio. I absolutely LOVED that house. There was a warmth to it. As soon as I closed the gate behind me & drove up to the house, it was like a wash of warmth & calm came over me.
    The property was formally a dairy farm and the house built in 1896. Around 1900 the home was renovated, made bigger. It had a very quirky staircase. Different from yours but still quirky.