Software
Houzz Logo Print
gabby_cole

3D printer pots

8 years ago

My SO got a 3D printer and printed me a pot. This could be dangerous :) can you say, custom pots??!





Comments (16)

  • 8 years ago

    Very cool! And it has god drainage.

  • 8 years ago

    Very cool, indeed!

  • 8 years ago

    I do like these a lot, but worry how light they are. I use terracotta pots and they are HEAVY - my guys live outdoors all year, and if I used perlite in plastic pots would fly around when the wind blew.

  • 8 years ago

    There seems to be a shortage of basic square plastic pots. I used to be able to find them in various sizes from 1 inch through 8 inches but can’t find them locally any more. I’d heard that a company that used to make them went out of business. I wonder if these 3D pots could be the answer?

  • 8 years ago

    I agree. I used to find square plastics at my local green market in side a agro-pharmacy, but now all they have is the standard round ones. At leas i recycled some from the greenhouse for my new plants....

    Why plastic square pots..?They look(to me) kind of "pro". That australian grower on youtube has most of his plants in square pots, and they look very orderly. Terracota is a no go for me. I have to overwinter them inside(which means moving), so thats kind of heavy. As per the weight issue, i cant find perlite being sold, so i use gravel as 45-60% of my mixes....

  • 8 years ago
    last modified: 8 years ago

    Hi Stefan. Square pots seem to be a bit of a space saver (more space = more plants!) That’s the only reason. My succulent table is very crowded and there is wasted space here and there due to the round pots. Terra cotta is my hands down favorite but the round pots don’t fit snuggly together like the square ones can. Basically edge to edge with no wasted space between them.

    I guess the best of both worlds for me would be if there were quality square terra cotta pots! I’ve seen some but they look like “toys” and not like they would stand up over time.

  • 8 years ago

    igteacher, I do love the drainage the pots have, someone who knew something about plants must of made this design :)

    dog, thanks, i'm going to pass that jargon advice on to my SO ;) I have wondered how these pots will hold up so good info! Do you have any cool designs for other pots you could recommend for printing?

    spanish fly, this pot feels slightly heavier than a standard 4inch plastic pot. plus, it's only 2inch tall and the base has a diameter of 2.8inch so I don't think it will tip over with a little nudge, like a typical plastic pot.

    socal, I think the only draw back to printing pots (if the plastic pans out fine) would be the time they take, especially if we're talking about collections of hundreds of plants! this pot took a few hours to print.


  • 8 years ago

    decorative baby groot pot

    multi-piece geometric pot, nice and deep

    sifter!


  • 8 years ago

    I would almost buy a printer just to get sieve set like that of my own sizes. Custom pots would be amazing too. Good job designing.

    Gabby C (FL 9A) thanked Jeff (5b)
  • 8 years ago

    Gabby I LOVE your baby Groot pot;)!

    Gabby C (FL 9A) thanked Kara 9b SF Bay Area CA
  • 8 years ago

    Gabby, love your pots! Here are some of the ones I've printed...


    also some grids to go on plant stands

  • 8 years ago

    That Groot pot is a cute bugger!

  • 8 years ago

    Here's a pot printed in Fillamentum Vertigo Galaxy. Love the way that filament prints, but hot sun was not its friend.

    new at the beginning of summer

    but after a summer of hot sun it lost its shape and turned into a little sack

  • 8 years ago

    Not as nice as it was originally, but still not bad. :-) Love the plant!

  • 8 years ago

    For those interested in the printer pots, you can check to see if your city has any you can use. In Austin, TX for example there is a "tech shop" that you pay membership to and you get to use all this cool equipment whenever you want, and a 3D printer I would imagine is standard at these places.

    Dog love the pots, and that grid is a great idea for the shelves.

    The white filament I printed the other pots with is a stronger one so i'm hopping it holds up better in the heat. We'll see :) I wonder if there is a coating/paint that would help the plastic hold up...