Software
Houzz Logo Print
akilakumar

Do I have very high standards?

7 years ago

Hello all,

I want to check if we have too high expectations of our builder.

We are demolishing and building a new house. The contractor has placed our vanity in this fashion in our Master bedroom bathroom. He placed additional drywall behind the vanity in an attempt to make it straight. He was well aware of the size of the vanity long before starting to build. We told him that the vanity should be straight. He claims that once we place back splash tile, this problem will go away. He does not want to fix it and says and we have very high standards. I wanted a third party opinion since we are very emotionally close to the problem at hand.



Thank you so much,

Stressed and sleepless,

Akila

Comments (19)

  • PRO
    7 years ago
    last modified: 7 years ago

    What is that white part? He's correct that it's very hard to get perfectly straight walls. Most walls will have some sort of curve and tile does minimize the look. But what's currently there would be unacceptable to me. It looks like the vanity is overlapping the white tile(?) and is jutting out.

  • PRO
    7 years ago

    A better (larger) picture would help.

    You need to be clear about what you think is wrong.

    You mentioned backsplash tile -- where will it go?

  • PRO
    7 years ago

    Hi there!


    You should NEVER feel like you have too high standards. After all, the contractor works for you. It's his job to satisfy you, unless you're asking him to do something that is a code violation or otherwise dangerous.


    While it's true that the backsplash tile will help to minimize the appearance of this gap, overall, the vanity will still be uneven, and you will have a space behind it. This is your money and your home, and you should be able to have everything done to your standards. This is the approach I take with my own clients, no matter how high their standards may be.


    Hope this helps settle your mind a bit, and best of luck with the rest of your project!!


    Michael

    Piper Stone Home

  • 7 years ago

    It's hard to judge how much of an issue there is from the photo. How large is the gap at the near side of the photo between the counter and the wall? How large is the gap down at the other corner? Is the backsplash tile the same depth as the wall tile that is already laid?


    The two things to be watching are 1. what is their proposed detailing to ensure a good seal between the backsplash tile and the counter. You definitely don't want water running down the back of your vanity cabinet and you also don't want a sealant joint that's going to fail and have to be redone all the time because it's oversized or under-supported for the application. And 2. How visibly noticeable is it going to be if the back of the vanity is slightly not parallel with the backsplash and wall. Slight out of plane and crookedness happens in all construction projects; the real skill is how it's accounted for so that most people don't even notice.

  • 7 years ago

    The vanity is not parallel to the wall. Why not? Tile will not cover that gap.

  • 7 years ago

    Who did the design work for this complex and very expensive project? Why aren’t they involved now?

  • 7 years ago

    is you builder questioning your vanity level or your vanity's level?

  • 7 years ago

    You need a better photo.

  • 7 years ago
    last modified: 7 years ago

    Tell him that you pay him so that your standards can be met. I hate this kind of laziness

  • 7 years ago

    Its difficult to judge something you can't see. Try a higher resolution photo from different angles.

  • 7 years ago
    last modified: 7 years ago

    Carolina Kitchen and Bath: Hahahaha!

  • 7 years ago

    The problem is the end wall not being at 90 to the back wall. That's the wall he needs to redo.

  • PRO
    7 years ago

    A higher res photo would be useful here to say for sure. But our instincts tell us to trust your gut on this one!

  • 7 years ago

    What is your vanity overlapping on the left? The problem is that it appears to be set diagonally to overlap that wall. You need it abutting the entire wall. Tiling will fill some of the gap but will not make the vanity flat against the back wall.

  • 7 years ago

    Not acceptable. He needs to fix this for sure.

  • 7 years ago

    Tell him that when you write his check it will be off a little bit.

  • PRO
    7 years ago

    Whatever level your standards are at, get a builder that has their's at the same level.

  • 7 years ago

    You do not have overly high standards. As you can tell, most of us would not accept

    that. Why was that tiling on the left put in before the vanity. I think that is the problem.

    Perhaps they could take down the one strip of tile so the vanity will sit flush with the wall.