Software
Houzz Logo Print
peakdog

POLL: Which range hood do you like best?

7 years ago
last modified: 7 years ago

Hello! I am designing a hood for our mountain home and have drawn up some concepts. There are only subtle difference between each of them. The hood will be made from steel with straps and rivets. Help me decide! Thanks!!



My mock-up of the kitchen...



Hood 1
Hood 2
Hood 3
Hood 4

Comments (17)

  • 7 years ago

    This is just my attempt at a mock up - it will likely be 24" ! I am quite tall and don't want to hit my head on it constantly!!! I find I rarely use my hood at my current home so not worried

    that 24" won't be sufficient.

  • 7 years ago

    Green Designs,

    Why would you make the hood 27" deep?

  • 7 years ago
    last modified: 7 years ago

    To have the effluent from the front burners actually be captured rather than escape. Effluent spreads out as it rises. You need wider and deeper both over your cooking surface e. Unless you just microwave, and don’t cook, and are just doing something insanely expensive and decorative, just because. Functional demands come first.

  • 7 years ago
    last modified: 7 years ago

    I think 24” deep front-to-back will be fine. I’d be much more concerned with the size of the duct going from the hood to the outside. It needs to be 8” or 10”, not smaller. If the duct is smaller you will regret it.

    As to your posted choices, #3 is trying too hard, to the point of being an affectation in the cabinet wall you show. I like #4 best if I must choose but it is like recommending in a cloud, due to the size of the examples you show, and just that one wall of cabinets with ZERO information about counters, floors, size of kitchen, style of the home. Frankly, all 4 look too dark and gloomy. I’d get stainless steel with its gleam to brighten up those dark cabinets.

  • 7 years ago

    Just a quick poll to get a sense of opinions...didn't want to overwhelm with pictures/layout, etc...voting certainly not req'd if I haven't provided adequate information or if the overall look is so distasteful that it doesn't merit a vote!


  • 7 years ago
    last modified: 7 years ago

    Jeri - just to reiterate what I said above, I like a hood with straps and rivets - but given what you've shown, I think you need something brighter than that dark material. And, like I said, you've left us clueless as to anything else in your kitchen - counters, floors, style, or what the style of the house is (traditional, contemporary, ultra-mod, the "modern farmhouse" we keep hearing from everyone, transitional, or what?). You don’t need to “overwhelm us with pictures/layouts”, but a couple more than that one little section would be helpful, plus some description of the style of your home and kitchen. Right now, it’s like you are saying, "I am buying a sofa, what about the green one for my living room?" and that's it.

  • 7 years ago

    Gotcha Shannon.

  • PRO
    7 years ago

    They offer ready made hoods on Houzz

    Rangecraft Range Hood With Non Directional Steel Bands & Rivets · More Info


  • 7 years ago

    I like the cabinet and backsplash style and colors. A rustic metal hood seems like it would fit into a mountain house. I prefer number 2 because it is symmetrical and has a clean look to it. I don't think your design is distasteful at all. I think other people just want more details so they can give you their best and most accurate response.

    .

  • 7 years ago

    Thx Beverly, I actually have a local company doing the work for similar cost. Are you liking something lighter in this space as well? The pictures I posted are just concepts, not exact coloring and in fact look darker than the reality of things!

  • 7 years ago

    Thanks Joshua!

  • 7 years ago

    Just watch out for any details or rivets on the side, you might have issues with clearances with the cabinet doors.

    I had to skip the banding and rivets on the side of my hood. Not something anyone else notices.

  • 7 years ago

    There should be something else in the kitchen that matches the finish on the hood, to tie it into the overall design. Either knobs/pulls or light fixtures.

    I did a rustic brass finish and my hardware matches

  • 7 years ago

    Yes chispa, completely agree! Cabinet hardware is my thought.

  • 7 years ago

    If you raise your hood high enough, you can extend it to 27" without worrying about bumping your head.

  • 7 years ago

    I like the one in the mock-up, but another option would be to skip the bands on the front piece--leave it plain, or add a pot rail that matches the cabinet hardware. Be sure to check the specs for the insert before you mount the hood; IIRC most require hood to be 28-30" from the cooking surface.