Software
Houzz Logo Print
webuser_429094581

Soffit repair/replacement

7 years ago

I’m hiring a contractor to repair/replace my soffit and gutters. I have original wooden soffit built in 1983. House is 1050 sqft. It has some wood rot on the soffit at the corners, as I can push my Hand through easily if attempted. Some paint is coming off the side wood trim, and soffit does not vent good. They quoted me around $3,200 to come out and put aluminum soffit coverings over the wood already in place, and drill new vent holes. My question is, is this standard practice? I thought they would replace all the old wood etc. They stated no need, and just want to cover all trim fascia board and soffit with vinyl aluminum and call it a day. Or course new gutters and downspouts as well.

Comments (11)

  • PRO
    7 years ago

    If there is a moisture issue and lack of ventilation, covering existing soffit with aluminum will only make it worst. It will continue to deteriorate behind and you will have greater damage down the road.

    Remove all of the wood soffit (most cases it's a 3/8" plywood) and fix rotted fascia if any and wrap the fascia with aluminum. and install vinyl ventilated soffit instead.


    Make sure they push back the insulation and you can add a few roof vents near the ridge.



  • 7 years ago

    Thanks for the response. I will check for moisture issue. So far it’s only one two corners of the soffit that are weak. I suspect maybe gutters were bad. The soffit is not venting good because it’s got old vents and paint on them. So I would rather have wood replaced. However, it is still safe and good price range to do what there wanting to do?

  • PRO
    7 years ago

    Yes, with the house being 1,000 SF you should be OK in that price range and even better.

    I would get a few estimates and compare.

  • PRO
    7 years ago

    Yes, in the first picture I provided as an example, the wood to which gutters attached, usually wrapped in aluminum and the soffit bellow where you have the plywood, there is vented vinyl soffit instead.


  • 7 years ago

    So if I understand you correctly. You are saying it’s acceptable to wrap fascia board and soffit plywood in aluminum, given there’s no moisture problem? They are not trying to rip old wood out, but merely wrap and weather protect current wood in place. Of Course drill more vent holes and new gutters etc.

  • PRO
    7 years ago

    Board yes, soffit no.

  • 7 years ago

    That’s what I was worried about. He said they would just cover all wood, and there was no reason to pull soffit plywood unless it had something major wrong. I just want the job done right, as I am on budget.

  • 7 years ago

    So should I let them continue? Or should I seek other company. They also want to replace my windows by cutting the very edge of the window frame and just lay in the new window instead of busting out the old metal/ aluminum frame. They been in business awhile, I’m just confused.

  • 7 years ago

    You can also replace the vent covers. Should be metal. They sell them, lowes, home depot and other places, and its a very simple thing to do for not much money.

  • 7 years ago

    I understand, I just have a few spots on the corners of the plywood soffit that are rotting/weak. So I was just looking to get it replaced.

Sponsored
AIS Renovations
Average rating: 4.5 out of 5 stars15 Reviews
Custom Craftsmanship & Construction Solutions in Franklin County, Ohio