Software
Houzz Logo Print
kudzu9

Looking for countertop removal advice

6 years ago

A friend is replacing his existing laminate on particle board countertops with granite, and he is doing the demo work. He asked me for advice on removing a part of the countertop that is trapped between the lower cabinets and cabinetry that sits on top of the existing countertop. The problem countertop is the one in the middle with the appliance garage over it, and he doesn't want to remove existing upper cabinets to get the countertop removed:













I'm thinking to start by removing the applied wooden strip around the front and right side edges, and then a circular saw to cut out most of the center of the countertop, followed by a multi-tool to cut out pieces of what remains until it's all cleared out.


I'd appreciate any suggestions about how to do this most efficiently, and with minimal damage to the rest of the cabinetry. Thanks.



Comments (10)

  • 6 years ago
    last modified: 6 years ago

    The concern is that you have to take out more than just the one cabinet....

  • 6 years ago

    To me your approach sounds doable. How is he going to get a new top in?

    kudzu9 thanked millworkman
  • PRO
    6 years ago

    Excellent question millworkman. I'd check the thickness of the new tops and the level of the existing lower cabinet. The top cabinet may have to be pulled anyway.

    kudzu9 thanked Joseph Corlett, LLC
  • PRO
    6 years ago

    You need to remove the top cabinet.

    kudzu9 thanked Morningstar Stone & Tile
  • 6 years ago

    I should have mentioned that I already pointed out to my friend that the new granite counter will be thicker than the gap occupied by the existing one that needs to be removed. The granite installer who did the laser measurements said that they would be able to deal with that and have a tight fit.

    So, I’m returning to my original query: If the top cabinet isn’t pulled, are there any other thoughts on removal techniques for the existing countertop? Thanks.

  • 6 years ago

    You could use a different edge on this section of counter--might be able to get away with it as it's its own zone kind of. Leave the existing counter and put the new on top of it with a big lip to cover the laminate. Or cut the laminate overhang back to the cabinet front and cover the front of it with maple trim in case anyone peeks under the new countertop.

    How good is the granite installer? The side looks tricky!

    kudzu9 thanked Fori
  • 6 years ago
    last modified: 6 years ago

    I suspect that it would take less time & be a lot less messy to just remove that cabinet. Also less risk of damage to the cabinet. What does the cabinet intersection to the ceiling look like? Hopefully there isn't a bunch of stacked crown molding.

  • 6 years ago

    ci_lantro- Good points. I haven't been able to actually look at in person...just have the pictures from my friend. I need to inspect it to see if I can easily help him pull just that one cabinet or if it's all tied up with the others and complicated by more molding.

  • 6 years ago

    Thanks everyone. I feel better equipped to make an on-site assessment now.