You can have it custom finished at your local flooring mill.

And just so you know, mills have a hard time working with 2 part products. The stuff used to finish on site is MIXED on site in small batches. Anything used in a mill (that has the capacity) will need to special-order the COMMERCIAL version of the mix. That gets weird and expensive REALLY quickly. Like SUPER WEIRD.

The 'hardeners', once mixed with the finish (the stuff in the BIG container) starts a chemical reaction that doesn't stop. As SOON as you mix the hardener to the finish (like in a VAT sitting in the mill) the 'spray' nozzles (or rollers) have to be monitored. Bona's products (like Loba) go stale inside of a few hours. That means the nozzles have problems, the rollers have issues, the VAT has to be changed out/cleaned, etc.

Bona produces the commercial application stuff (ie. in the mixer in a vat) but that is tough to find on this side of the Ocean. The European market has access to all of this because A. many work with Bona on many things and B. it isn't very far to ship and C. The VOC requirements in Europe are SOOO tough that it only makes sense to have the specialty mechanisms available in the mill.

I personally choose site finished. It is the gold standard of the flooring industry. It is only a few days longer to install and Bona HD cures VERY quickly (5 days or less). It is cheaper in the long run as well.