Software
Houzz Logo Print
matthew_s55

Toilet only flushes when left running

6 years ago

My younger ones recently got into the toilet tank and disconnected some parts (chain, fill tube) on a previously working toilet. After putting everything back and adjusting to the same settings as an identical toilet downstairs, I can't get a full flush.


The tank fills up all the way, the flapper opens, the chain's tight, water goes in the bowl and there's no clog in the drain. After some tinkering, I found that by adjusting the fill valve so that the toilet's constantly running I can get a full flush. Weirdly, I also get a full flush if I let it fill the tank to a normal level but then put soap in the overflow tube and let it sit (I thought maybe it was a clog elsewhere), but then after one or two flushes it goes back.


Any thoughts what's going on?

Comments (4)