Software
Houzz Logo Print
jally1

RESOLVED No basic 2-handle faucet with all-metal cartridge anymore?

6 years ago
last modified: 6 years ago

Is there not ONE Basic 2-handle faucet, with approx. 9" spout, that's ALL metal?

With an all-metal cartridge a/k/a stem-unit assembly?

Something like the B2310LF Delta, albeit all-metal stem-assembly.

https://images.homedepot-static.com/productImages/17c433da-0c01-406e-aafe-6ede081a72bf/svn/chrome-delta-standard-kitchen-faucets-b2310lf-64_145.jpg

Or the Moen Banbury albeit all-metal cartridges

https://images.homedepot-static.com/productImages/5d24226b-6d4e-4caf-8586-9c730c456b30/svn/chrome-moen-standard-kitchen-faucets-ca87553-64_145.jpg

For clarification, please see the Comments area here, as well as photo:

https://www.plumbedelegance.com/before-you-buy-your-new-faucets?doing_wp_cron=1603747745.9476790428161621093750

Sprayer for me is non-priority, so i'd rather not discuss that part.

Has most metal disappeared to the ethers since the 1990s?

Alternatively, which is most durable, not made of cheapo nylon.

Comments (14)

  • 6 years ago

    Chicago Faucets. That company is geared to the professional tall pre-rinse faucets used in restaurants, butchers, cafeterias, and other commercial establishments. Some people do buy them for residential use. They also make the kind of faucets your OP mentions. Though I’d like to know why you want such a kitchen faucet. There are reasons that style is rarely found these days. If you have an idea of romanticized old-timey faucets you may be in for a surprise at how clunky and unwieldy they are in a kitchen compared to modern single-handled faucets with a good integrated sprayer.




    jally thanked Shannon_WI
  • 6 years ago

    Oh boy, while i appreciate the lead, (and they do have quality faucets) sorry i wasn't so clear, because by "basic" i also meant to-me-affordable pricing. Plumbers also aren't too clear, as not everyone knows what 8" center means (nor what "fixtures" means)


    Look, i think i'm going with the B2310LF after all. Thanks again!


  • 6 years ago

    @User: "Don’t shop at box stores and there is. That’s one of the ways they cheapen the products there."

    Prove that plumbing supply stores sell different products than Home Depot or Lowes.

  • 6 years ago

    Yeah we were in the same boat. We ended up ordering a repair part for our old faucet instead of replacing the whole thing with plastic.

  • 6 years ago

    @User: Show me a Delta faucet that's sold in two versions: a "cheap" version that's sold in a store such as Home Depot and an "improved" version that's sold at a plumbing supply store. I expect to see two faucets that are IDENTICAL except for the innards.

  • 6 years ago
    last modified: 6 years ago

    OK, guys, are any of you experts?

    If so, if you don't mind, i don't have time now for debates, rather just decisions.

    So i need a quick fact-based answer to this:

    I was researching and saw a Moen Adler 87046 faucet https://embed.widencdn.net/img/moen/wpvikqg9hf/514x514px/87046.tif.jpg?q=90

    as compared to this Delta B2310LF https://media.deltafaucet.com/elvis/OnWhite/md/B2310LF-B1.png

    But i'm trying to determine:

    (1) whether to cap off its sprayer and instead use a Swivel Aerator to clean sink bowls, or

    (2) use its sprayer but risk problems notorious with sprayers

    The problem is, that it's low arc.

    So that leads to further question:

    (3) If i unscrew the Aerators of EITHER the Delta B2310LF

    ...OR the Moen 87046

    ......then screw on, say, Waternymph, Totomo, or bubble-stream

    ..........which will have the higher clearance for tall-pots, the Delta or Moen?

  • 6 years ago

    Go to a plumbing supply hous.

  • 6 years ago

    ".which will have the higher clearance for tall-pots, the Delta or Moen?"

    Why don't you look at the specs sheets for products on sites such as build.com? They will show the spout heights of the faucets.

  • 6 years ago
    last modified: 6 years ago

    Of course i saw those specs!

    But specs do NOT say height WITHOUT original aerators on!

    Please read my question #3 again. I phrased it carefully.

  • 6 years ago

    No one knows based on just a picture. I’d go with the sprayer as is because they both seem way too low by an eyeball.

    jally thanked mrykbee
  • 6 years ago

    Oh good lord, not the Big Box vs plumbing distributor thing again! If it's the same model # it's the same thing.


    Nylon, silicone, etc in the right places is the higher quality choice. Praise be to the plumbing gods that I'm not still dealing with all brass faucets! Brass pits, corrodes and can dezincify. You also have to insure you are using lead free brass.


    Seriously - look at how dependable, long lasting, and leak free faucets with nylon parts are, Can we please put and end to the "quality all brass faucet" nonsense. I like the feel of metal handles, spouts, etc... but the reliability and longevity of nylon seats and wearing surfaces, silicone seals, etc. is really hard to debate.

    jally thanked Jake The Wonderdog
  • 6 years ago

    Thanks all. I wound up getting the Moen.

    RESOLVED.

  • 4 years ago

    Which one?