Software
Houzz Logo Print
akdeberghes

Upper stacked cabinet dimensions/ratio

5 years ago
Hello, I've admired this kitchen for years and as fate would have it my husband and I are moving to Houston, TX and building a house with 11' tall ceilings. Could you please tell me what heights you used for each of the stacked upper cabinets as well as the molding height? I've tried to deduce it from prior questions but can't get there mathmatically. thank you!
North San Antonio Kitchen Remodel · More Info

Comments (4)

  • 5 years ago

    They have 12 ft ceilings in this house. ... your cabinet guy will reduce yours to make it work or the upper trim to be smaller . My other house they Could not get the upper cabinets but I had 10 ft ceilings , This house my ceilings are even higher than 12 ‘ Hope my info helps some. . hopefully they can help also on your question . Curious if it will look good on 10 ft ceiling also

  • PRO
    5 years ago

    Hi, what will look best is a 3 to 1 ratio for your stacked wall cabinets. The base cabinets with the countertops are typically 36” tall, then you have an 18” tall backsplash. Divide what’s left in height by four. That measurement is the top stacked cabinet height. The rest is your lower wall cabinet height. I hope this helps. Best of luck with your project!

  • 3 years ago

    I am in the same predicament with the calculations.  I also have a 11 ft ceiling and according to the calculations my supper cabinet would be 19 inches.   How much allowance do I need to leave for molding

  • PRO
    3 years ago

    Hi Karlene, crown is typically around 6” tall. However, I would definitely recommend that you work with a kitchen and bath designer or cabinet maker to assist you with the layout. The above recommendations are just general guidelines, but there’s so many details and deciding factors that go into designing a kitchen (especially with tall ceilings) that you’ll need the assistance of a professional to achieve balance and avoid any costly mistakes. I hope this helps and best of luck with your project!