Software
Houzz Logo Print
larryuno

Hydro Gear rebuild apparently failed

5 years ago

I recently spent much time to learn how to rebuild a hydrostatic transaxle. Although installing the center section, pump shaft, the swash plate and the two piston blocks as one unit was a huge challenge, I thought I had finally gotten it right, and turned the pump shaft to check that it turned freely. But after install I have spent at least an hour trying to purge the unit, bypass on, bypass off, and when it's bypass off sliding into forward or reverse causes a distress sound. I tried to record it but don't see how to attach the file here. Maybe you have ideas why the failure, they are welcome.

Comments (2)