Software
Houzz Logo Print
keeneileen

How to cover drywall with bullnose edges?

4 years ago

Finally couldn’t stand it anymore! My husband ripped out the brown glass backsplash in this kitchen, and we’re going to repaint the cabinets too.

This is a temporary fix, so we don’t want to re-tile. What reasonable options are there to cover the area where the backsplash was? At first I thought beadboard, but I’m not sure how to wrap it around the bullnose edges of the drywall by the pantry door and the window.

Comments (11)

  • 4 years ago

    Seems like a piece of rounded trim would work, or scribing the back of the beadboard to wrap around the corner. That’s a lot of work for a temporary fix 🙄

    Would be easier than trying to refinish the wall to match our existing texture though.

  • 4 years ago

    Just patch the wall near the pantry. Your backsplash shouldn't extend to the side wall. JUst do the beadboard on the back wall.

    There's also some nicer peel and stick backsplashes now that aren't as bad as they were when they first came out.


  • 4 years ago

    if it were mine,

    I would put a metal drywall bead and tape over the corner. it often takes x3 compound and sanding a day apart.

    I am not a fan of rounded wall corners. I'd make a square edge.

    as a professional drywaller, looks like an easy fix.


  • PRO
    4 years ago

    I'd try to take advantage of the present distressed look. Love the rounded corners.

  • 4 years ago

    if it's temporary Just mud it up and paint it. Bead board is ah, how can I nicely put it, not something to put on a back splash and a waste of wood. I agree with Joseph, rounded corners are cool and In a new home rounded corners are an upgrade.


  • 4 years ago

    Appreciate the comments! I see lots of beadboard in kitchens, is it that bad? Slapping something over the damaged wall seemed easiest, especially considering that the walls have orange peel texture.

    Attached a mock-up of what I’m going for. I’m hoping to finish it well enough to last 5-7 years. It’s a mountain house, so I want to put real wood cabinets in eventually but it’ll take a while to save enough for that.

  • 4 years ago

    I would rip off the bullnose corner bead and replace with square edge, too. Not a fan of bullnose at all.

    The drywall is a mess. Easiest thing probably is to cut it away and install new drywall, squaring up the corners in the process. Since this is temporary, I'd paint it and call it good.


  • PRO
    4 years ago

    IMO bullnose corners are not an upgrade . As for what you are planning good luch it ilasts a year Go get some tile and learn a new trick and I sure do not understand how crappy bedboard is an upgrade form nice glass tile youa re going backwards . I agree if this is what you want drywall finish it and paint .

  • 4 years ago

    Hi Patricia, we know how to tile. Thanks for your input that beadboard would only last a year — certainly not what I’m hoping for.

    Although, if you like the brown glass backsplash that was in the kitchen, we have very different taste 😅

  • 4 years ago

    I actually do like the curved walls, it's a vintage look. If you did temporary beadboard and framed them, the curves could be revealed and restored later if you wanted to keep them.

    There are a lot of people on Houzz who don't understand the concept of doing something temporary while you wait for the official reno in a year or so. I get it though, DIY home improvement is my favorite hobby so I think this kind of stuff is fun. Beadboard is a perfectly legitimate placeholder for a kitchen backsplash.