Need help determining the size and how to install an LED mirror

3 years ago

last modified: 3 years ago

https://www.homedepot.com/p/TOOLKISS-48-in-W-x-36-in-H-Large-Rectangular-Frameless-LED-Light-Anti-Fog-Wall-Bathroom-Vanity-Mirror-Super-Bright-EM004-W55128012/317583429#overlay

Hello,

I need some help purchasing and installing an LED mirror. I need to determine the size but to do that I need to figure how it will be installed. It is a small bathroom and with a standard mirror with a row of bulbs about 6 inches above the mirror.

When purchasing an LED mirror should I purchase one that matches the current dimensions of the mirror, 36x42, or should I purchase a larger one that will also cover the strip of bulbs at 36x48? Please see the scenarios below.

Scenario 1 buy one the same size as the current mirror- In this scenario, I believe an electrician would need to create a second electrical opening that will be behind the current mirror and draw from the strip of bulbs above. This sounds much more expensive than the scenario below. Should I just get a larger mirror and use the electricity that is currently in the strip of bulbs?

Scenario 2 buy one that is larger that covers the strip of bulbs- This scenario sounds the simplest. Get a 36x48 mirror and cover the strip of bulbs and use the power from there. It will save money of as I wouldn't need to create a second opening. I have two concerns, one if the LED mirror is the only source of light in the bathroom will it be bright enough? Also when I walk into the bathroom, I would use the wall switch instead of taping on the mirror correct? Above is the link to the mirror I'm thinking of purchasing that is supposedly super bright.

I hope this make sense. I appreciate your help.

Sort by:Oldest

Comments (10)

kudzu9
3 years ago
1. Download the installation instructions. Contact the manufacturer if necessary.

2. Find out if the LED bulbs are replaceable in case something fails in a couple of years when it's no longer under warranty.
HU-295774461
Original Author
3 years ago
I appreciate the reply but that has nothing to do with the question.
Related Professionals
Fergus Falls General Contractors · Lima General Contractors · Bloomington Home Remodeling · Fort Collins Home Remodeling · Yakima Home Remodeling · Anchorage Home Remodeling · Chatham Home Remodeling · Emporia Bathroom Remodelers · Cape Girardeau Kitchen & Bathroom Designers · Southaven Kitchen & Bathroom Designers · New London Kitchen & Bathroom Designers · Dothan Bathroom Remodelers · Rockford Bathroom Remodelers · Rolla Tile and Stone Contractors · Newark Tile and Stone Contractors
kudzu9
3 years ago
last modified: 3 years ago
Well, if you don't think the installation instructions are relevant to how you approach this then I'm concerned about how this is going to turn out for you....
HU-295774461
Original Author
3 years ago
Anyone else have any thoughts on what length I should choose?
thisisnotadrill
3 years ago
i don't think you can go wrong with the larger mirror. regardless of the size you choose you will still have to patch the wall somewhat anyhow, when you remove the bulb strip.

The mirror you linked does support being hardwired to a switch.

I have a similar mirror and my bathroom is tiny and it is often the only light I use in the bathroom. I also have an overhead light integrated into the fan if needed but I usually only turn that on for cleaning.
Karenseb
3 years ago
I am a little confused. Your origninal mirror is 36 by 36 square and the linked mirror is 36 by 48 inches.

Is the mirror going to be landscape oriented or vertical?

How tall is your ceiling and how wide is your vanity?
HU-295774461
Original Author
3 years ago
It will be vertical, 36 inches wide and 48 inches in length going up. I have tall ceilings since I live in a loft. Vanity is 42 inches wide.

Thisisnotadrill you made a good point that I could install a fan with a light if needed. I also do have a separate light in the shower.
Karenseb
3 years ago
I think a taller mirror might work in a loft.
mtvhike
3 years ago
Are your concerns design (visual) or electrical? Remember that you cannot cover an existing box/outlet with a permanently mounted mirror.
HU-295774461
Original Author
3 years ago
last modified: 3 years ago
They are electrical. Here is a pic of what I'm referring to. I would get a larger mirror 36x48nthat would cover where the bulbs are and remove the bulbs. I can't cover that with an LED mirror? How else would I power it if I couldn't do that?