Software
Houzz Logo Print
pinkshell8

Apron sink for corner cabinet

3 years ago

We are doing some kitchen updates, including cabinet painting, new quartz countertops, and new sink and faucet.


I was hoping to get a stainless steel apron sink. I tried to educate myself on this and found most guidance says the cabinet width should be 2-3" wider than the apron sink. Since our sink area is in a corner cabinet, the front of the cabinet is only 25.5" (see photo), despite the inside of the corner cabinet being ~45" wide. For context, my current undermount sink bowl width is 30".


Based on above, it seems like only a small apron sink (~23" wide) would fit due to the size of the front of my cabinet. That is too small for the space and our needs, but before I abandon the apron sink idea, I wanted to see if anyone else has encountered this issue with a corner sink and found any creative solutions?


Thanks for reading this as well as all the other helpful advice and ideas this community shares. These discussion boards have been invaluable to me since I became a homeowner a few years ago. :-)



Comments (6)

  • 3 years ago
    last modified: 3 years ago

    I had a corner sink once, in a small kitchen, and it was a great solution @User. It allowed a much larger counter space on a peninsula, which enabled much more prep space and also i could serve dishes/platters/drinks on that peninsula to guests, and the counter was not broken up by a sink. The other advantage is that it used what would otherwise be a dead space in a small kitchen that needed every inch of space it could get.

    The corner sink was far from dysfunctional, it was very functional. I think every small kitchen should have a corner sink. The only negative I had with it was that if someone is using the sink, and someone else needs to use it, you can't both be standing at the sink since it's in a corner. But that almost never happened and it was not a big deal. That is one negative, and a corner sink should not be called "dysfunctional". A corner sink must have a cabinet between it and a dishwasher, but that is actually convenient for a trash pull-out. I will always advocate a corner sink in small kitchen. The Pros who are against them must never have designed in a small kitchen.

    @pinkshell8 - I think you have already hit on the issue with an apron sink in a corner location - it requires a wide cabinet base. That is as opposed to an undermounted sink that is set back a few inches from the counter edge and thereby captures the larger width of the cabinet base at that set-back location. Unless you are willing to pull out and reconfigure base cabinets - and at that point, the ball starts rolling and all the cabinets come out - you should install an undermount sink in a corner location.

    pinkshell8 thanked Miranda33
  • PRO
    3 years ago

    "...most guidance says the cabinet width should be 2-3" wider than the apron sink."


    This is because sink manufacturers haven't caught up with the times. They think you need room for fat plumber hands to get access to their junk provided leaking clips. If you strap your sink in place (Hercules Universal Sink Harness, Sink Strap) side access is obsolete and your sink won't leak. A 36" sink undermounts into a 36" cabinet, a 33" into a 33", etc. Throw their provided clips and specifications in the trash please.


    Unfortunately, you need an apron as wide as your existing cutout, apparently 30" and you only have 25 1/2". I've seen some funky reduced aprons, but it looked like a weak spot in the top to me.

    pinkshell8 thanked Joseph Corlett, LLC
  • PRO
    3 years ago

    @pinkshell8 There may be another option for you. We have been doing this type of installation for two decades with no issues with the countertops. I know my friend, Joe Corlett, may find fault in the installation as the two small wings are a bit fragile, however, I have been in touch with several past customers with this type of installation and there have been no issues.


  • PRO
    3 years ago

    The success of that detail probably depends upon the homeowners and the composition of the top. That looks like engineered stone which is much stronger than natural stone. If it works, I'm all fot it.

  • 3 years ago

    @Rachiele Custom Sinks thank you for sharing your creative solution! After thinking it over this past week, we decided to go with non-apron stainless Ruvati since it seemed like the easiest way to keep the size sink we currently have. The husband is confident once we have the large single basin (as opposed to the two basin sink we have now) there will be less of a tsunami of water going down that faux drawer panel when he washes pans, which was one of my personal drivers for the ss apron to begin with. :-)