Software
Houzz Logo Print
nicemac

Culligan Water Softener Question

3 years ago
last modified: 3 years ago

I have had a Culligan Medalist water softener for 20 years. We bought it in 2003 while in our previous house. Culligan tested the water, set it up and it worked great.

Three years later, we moved and took it with us to our new house, where the water was noticably softer. I lowered the frequency of regeneration and it has been softening "fine" for 17 years. During that time, I have had to re-bed the resin tank a couple of times and rebuild the brine piston asembly a couple of times, most recently, last week.

While rebuildng it this last tme, I started to wonder how often I should be regenerating the resin.

I have searched high and low for a worksheet or something that would help me calculate what the setting should be.

My Scenario:

  • 3/4" water inlet (50-60psi inlet pressure, varies)
  • Water hardness (tested today) 7 gpg
  • Culligan Medalist w/ 8" resin tank (.7 cubic ft) and 18" brine tank.
  • We use about 5,500 gallons of water per month.
  • We currently regenerate every 1,000 gallons.

Questions

  1. How often should I regenerate?
  2. How much salt should be delivered during regeneration?
  3. How long should the backwash time be set for?
  4. How long should the brine draw/ slow rinse time be set for?



I am not interested in buying another system. I have this one, it's working and I am just interested in optimizing it.

Thank you in advance.

Comments (2)