using deck plate on plastic laundry sink??

last year

The new house we have has plastic laundry sink with a builder grade two handle low neck faucet. I want to replace with single handle higher one—and in black. I know I need a deck plate to cover the two extra holes. (I don’t know if I have space underneath to add dispensers for like two different stain removers) so am just considering faucet.

This laundry sink has a raised panel in center with a recessed area on each side—like they knew this was going to get a deck plate at some point in time…
Most faucets come with deck plates—am I going to have to look for faucet with specific sz deck plate to fit sink or are most of them a common size????

Looked on here but can’t find photo of similar sink to post…

Sort by:Oldest

Comments (7)

PRO
JAN MOYER
last year
last modified: last year
It doesn't matter. : ) You take a picture of WHAT YOU HAVE and upload it, with a tape measure in front of the faucet. It's probably nothing more than an 8" spread and deck plate that covers it. Which is pretty darn standard : )
bearbev
last year
In case you need this option - faucet hole plates are available in different finishes. I needed to plug one faucet hole and was able to find a round plate that matched my stainless-steel faucet.
Related Professionals
Longview Interior Designers & Decorators · Elkton Architects & Building Designers · Bakersfield Architects & Building Designers · Cleveland Kitchen & Bathroom Designers · Pullman Kitchen & Bathroom Designers · Rocky Mount Cabinets & Cabinetry · Charleston Cabinets & Cabinetry · Frisco General Contractors · Orlando Home Remodeling · Carbondale Home Remodeling · Elgin Home Remodeling · Aberdeen Bathroom Remodelers · Marietta Bathroom Remodelers · Virginia Beach Bathroom Remodelers · Milwaukee Bathroom Remodelers
PRO
Patricia Colwell Consulting
last year
We need to see your sink so post a pic here in a comment
ci_lantro
last year
You can find single hole pull down laundry faucets with an escutcheon plate that solve this problem. Like this one from Home Depot:
PRO
JAN MOYER
last year
last modified: last year
"I want to replace with single handle higher one—and in black. I know I need a deck plate to cover the two extra holes."

_________________________

We need the centers or a picture with a tape measure in front of what she HAS.

It's either 4" on center 0r it is 8 "on center
loves2read
Original Author
last year
The raised deck area is 11x4.5 but this faucet doesn’t cover it all
There are 2 small lower areas either side raised part
That side is 4.5” from back to sink opening
PRO
JAN MOYER
last year
You do not NEED to cover it all. It is a laundry sink, builder, and the recess is a "detai' send the water back into the sink.