What size panels did you use on ceiling? type of wood? how fastened

12 years ago

Looking to do plywood ceiling on greater slope- like the size and "gap" on this one. Would love to hear how this was done. Thanks

NowHouse · More Info

Featured Answer

PRO

Domiteaux Garza Architecture

11 years ago

these were actually glued to the ceiling. these have an 1/8" gap between them. another suggestion would be to have your carpenter chamfer the edge or a square edge around all the edges of the plywood, thus giving the allusion of a gap and gives a dimension to the edge. this plywood is actually 1/4" thick.

Sort by:Oldest

Comments (9)

PRO
Domiteaux Garza Architecture
12 years ago
these are 4x8 sheets of birch veneered plywood. the homeowner actually found a great deal on these sheets. this house was constructed on a budget.
Ryan H
12 years ago
I'm working on a 1967 ranch remodel to modern and like your look very much and too are on tight budget. Could you tell me good economical source of exposed A/C duct and short description on how you mounted and finished plywood sheets?
voycon_construction
12 years ago
what are the thickness of these sheets, and are they fixed on the face.
Tammi Damron
11 years ago
I found a great deal on a pallet of birch plywood, 9.00 sheet for 4x8. I plan to cover my basement ceiling , but am unsure how to begin, any suggestions greatly appreciated. I will have help from a carpenter.
fernando gocha
9 years ago
hi, what did you use for the black edging plywood ceiling?
PRO
Domiteaux Garza Architecture
9 years ago
just plywood painted black
fernando gocha
9 years ago
smart!, thanks
ingognito
5 years ago
Were any screws used on this ceiling? If not, how were the plywood panels held up on the ceiling while the glue set?