what appliance pulls go with the asbury line from restoration hardware

Robinsonkd3@gmail.com House2012

12 years ago

purchased asbury pulls from Restoration hardware for our new kitchen. Apparently they do not make appliance pulls. I need 12" or 18" pulls the the 48" sub zero. What are some options that compliment the asbury hardware?

Featured Answer

PRO

User

12 years ago

I can fabricate pulls to match Asbury. Do you have the original Sub-Zero Pulls?? We usually like to use one of the original pulls as a sample to make sure that there are no problems and the mounting screws line up with the factory holes. Mounting to a wood panel may not work correctly. I have seen the panels become loose and break due to the force required to open the doors. On a pair of doors the pulls are usually offset. If you use straight pulls you could hit your knuckles on the opposing pull as you open the door.

Sort by:Oldest

Comments (8)

PRO
WrightWorks, LLC
12 years ago
Lots of choices here: http://www.thehardwarehut.com/cabinet_refrigerator-search.php

What finish?
Robinsonkd3@gmail.com House2012
Original Author
12 years ago
polished chrome finish
Related Professionals
Sebring Interior Designers & Decorators · Shreveport Interior Designers & Decorators · Syracuse Interior Designers & Decorators · Fort Smith Architects & Building Designers · Kansas City Architects & Building Designers · Austin Architects & Building Designers · Williamsport Architects & Building Designers · Ontario Architects & Building Designers · Florence Kitchen & Bathroom Designers · Selma Kitchen & Bathroom Designers · Tallahassee Kitchen & Bathroom Designers · Great Bend Kitchen & Bathroom Designers · Morgantown Kitchen & Bathroom Designers · New Bedford Kitchen & Bathroom Designers · Palm Desert Kitchen & Bathroom Designers
Sonia
11 years ago
Hi Jefferson Park collection. I'm redoing my kitchen and I would like to use the Lugarno pulls in polished chrome, from Restoration hardware, but they don't make appliance pulls.
Could you fabricate appliance pulls to match the Lugarno pulls for the 36" integrated subzero (3 12" pulls)? If so what would be the cost? Thank you.
PRO
User
11 years ago
We can make a similar pull in 12". The rod should be a minimum of 3/4" round for a 12" pull. The cost in Chrome would be 800.00 each for straight pulls. Offset pulls may be required if the pulls are mounted close to each other on a double door unit.
Donna Sesto
11 years ago
I would be looking for the exact same thing, I also purchased the lugarno pulls ( in polished nickel) however i didn't realize that i would need 2 appliance pulls to match.
PRO
User
11 years ago
Hi Donna, Let me know if we can help. Our current lead time is 3 to 4 weeks for custom orders. Lead times change depending upon our current work load.
Cc
10 years ago
Did anyone end up using Jefferson park for a custom Laughton pull I need the same for my fridge. Wondering how they came out?

or Jefferson park, do you have photos of the pills for the two mentioned custom projects above?

if so pls contact me coricross@hotmail.com