RIGHT in swing- Aquatex Glass, 4 Custom handles INCLUDED Door Specifications 1. 12 Gauge, Standard door jamb is 2” X 6” widths in 2.5 mm tube. 2. Door sheet is made of 2” X 6” 2.5 mm tube. 3. Our scroll work is hand forged using 5/8” solid iron. 4. The doors come on a pre-hung steel frame. The steel frame supports the weight on the doors and allows easy installation. The frame is equipped with mounting flanges to secure the frame into the framing with lag bolts. 5. Prior to painting, the doors are sand blasted, hot zinc coated for rust protections, then primed with a two part epoxy primer and faux painted with high quality acrylic paint, the clear-coated. Before the clear-coat application is applied the door is baked at 80 degrees for 30 minutes. This hardens the finish for maximum protection from the elements. 6. Doors are equipped with interior glass panels that open independently from the door. This feature allows for ventilation, cleaning and security by keeping the door closed and locked between homeowner and the outside party. 7. The glass comes installed and the glass frame can be prepared for either 5/16” tempered glass or 11/16” insulated tempered glass. All doors require tempered glass to insure safety code requirements. 8. All doors utilize a mortise and tendon type ball bearing hinge with grease fittings. 9. All doors come insulated with high quality foam insulation that is pumped into the jamb and also into the style of the door sheet. 10. A rubber weather stripping is used around the door frame, the glass frame. Aluminum or iron sill is included. 11. CAD drawings are created to insure that the right design size and configuration meet all the customers’ needs. Foot bolts and head bolts are used on double door units. The flush bolt is the mechanism that locks the inactive leaf of the double door unit. The head bolt locks into the top of the door frame and the foot bolt locks into the threshold/floor. 12. Doors can be manufactured to swing in or out. Arches are available in half circle, eyebrow and elliptical as well as rectangle. Our standard hardware spec is 2 1/8” boring, 5 ½” center to center and 2 ¾” backset. For any other question please give me a call 818-633-8306 Thanks Maryam

Transitional dining room photo in New York

Allstatepools - Designed and built by Richard Babcock
Example of a mid-sized backyard stamped concrete and rectangular infinity hot tub design in Los Angeles

MCM Style with Perpindicular Glass Slivers
Inspiration for a modern front door remodel in Salt Lake City with a medium wood front door

Screens to add privacy to a decked area with a low surrounding wall
Deck - mid-sized contemporary backyard balcony deck idea with no cover

Signature Aquatics | Midnight Blue Pebble Tec
Inspiration for a contemporary pool remodel in Phoenix

Toni Waterman
Eat-in kitchen - mid-sized cottage u-shaped eat-in kitchen idea in Santa Barbara with an undermount sink, beaded inset cabinets, distressed cabinets, granite countertops and stainless steel appliances

J. Albert Studios
Huge traditional brown two-story wood exterior home idea in Cleveland

Mid-sized trendy light wood floor hallway photo in Dallas with white walls

Example of a large eclectic master medium tone wood floor bedroom design in San Francisco with gray walls and no fireplace

Inspiration for a small traditional full sun backyard stone water fountain landscape in Orange County.

Elegant nursery photo in Calgary

C Kevin Coffey
Staircase - cottage staircase idea in Nashville

Custom Mural done by O&O Interior. Alice in Wonderland themed room for a little girl.
Inspiration for an eclectic bedroom remodel in Austin

Custom Surface Solutions (www.css-tile.com) - Owner Craig Thompson (512) 430-1215. This project shows the remodel of a small 1950's vintage home master bathroom. 8"" x 18" Calcutta gold marble tile was used on the shower walls and floor wall base and ceramic gray penny tile on the floor. Shower includes curbless pan / floor, dual shower boxes, frameless glass slider, trough duel fixture sink and chrome fixtures.

Quite a few recent requests for our custom metalwork have included the use of a wire backing. This photo shows Klise’s custom #301 grille pattern using reeded stainless steel alloy wire (1/8” x 1/16”) with #16 stainless steel wire backing. Of course, this is electropolished…

Concrete, Exposed Aggregate
Patio - coastal patio idea in Philadelphia

Sheer and blackout drapery on a decorative metal rod. Both with Ripplefold style.
Example of a trendy bedroom design in Seattle