Search results for "Fasteners" in Home Design Ideas

Andrew Cutright
Example of a mid-sized classic backyard stone patio kitchen design in DC Metro with a roof extension
Example of a mid-sized classic backyard stone patio kitchen design in DC Metro with a roof extension

Infinity Aluminum Pergola, Driftwood Embossed, Ivory Kynar500 Paint Finish, Stainless Fasteners, Lifetime Warranty!
Patio - traditional patio idea in Austin
Patio - traditional patio idea in Austin
Find the right local pro for your project

This project is a huge gable style patio cover with covered deck and aluminum railing with glass and cable on the stairs. The Patio cover is equipped with electric heaters, tv, ceiling fan, skylights, fire table, patio furniture, and sound system. The decking is a composite material from Timbertech and had hidden fasteners.

Picture framed Trex deck with cable railing.
Example of a mid-sized mountain style backyard deck design with no cover
Example of a mid-sized mountain style backyard deck design with no cover

PROJECT DESCRIPTION:
The client requested a large (19 foot wide by 15 foot projection) two-span retractable waterproof patio cover system to provide heavy rain, hail, heat, sun, glare and UV protection. This would allow our client to sit outside and enjoy their garden throughout the year, extending their outdoor entertainment space. For functionality they requested that water drain from the rear of the system into the front beam and down inside the right end post, exiting at the bottom from a tiny hole and draining into the flower beds thus preventing rain water from simply dropping off the front of the unit. The entire system used one continuous piece of fabric and one motor. The uprights and guides meet together at a smooth L-shaped angle, flush at the top for a perfectly smooth profile. The system has a Beaufort wind load rating Scale 10 (up to 63 mph) with the fabric fully extended and in use. A grey hood was also used to prevent rain water, debris and snow from collecting in the folds of fabric when not in use. A running profile from end to end in the rear of the unit was used to attach the Somfy RTS motor which is installed inside a motor safety box. Circular concrete footers were installed in the grassy area in front of the unit for mounting the 3 posts. To allow for a flat vertical mounting surface, a ledger board using pressure-treated wood was mounted the full 19-foot wall width, as the client’s house was made of uneven, thick stone.
PURPOSE OF THE PROJECT:
The client’s intention was for installation of a retractable waterproof patio cover system to provide heavy rain, hail, heat, sun, glare and UV protection for their backyard patio area.
What is unique or complex about the project?
This project was difficult for two main reasons: 1. Very large installation fasteners needed to be used to install through the above referenced ledger board and deep in to the stone structure of the house. 2. The motor cable needed to be placed through deeply drilled holes as the stone wall house wall is 15” thick. Drilling through en-even stone was definitely a challenge.
PROJECT RESULTS
The client was delighted with the results. The retractable patio cover system now makes it possible for the client to use a very large area in the rear of their house 24/7, 365 with the exclusion of snow. Since the client was very happy, they will be covering the ends, front and sides with our motorized vertical drop zippered awnings. Gable ends will also be covered with fixed fabric panels. Enclosing the entire area will allow the customer to heat the space in the winter and air condition the space in the summer.

Photos by Anna Breyer
Mid-sized backyard deck photo in Philadelphia with an awning
Mid-sized backyard deck photo in Philadelphia with an awning

An iron chandelier adorned with Strauss crystal and created by Schonbek hangs from the ceiling and matching sconces are fastened into the mirror.
Designed by Melodie Durham of Durham Designs & Consulting, LLC.
Photo by Livengood Photographs [www.livengoodphotographs.com/design].

This project was a complete rebuild of the deck, railings, and columns. We supported the roof structure above while the deck was replaced.
Flooring: 1"x4" IPE stained with oil.
Railings: 2"x4",2"x2" mahogany with oil primer and finished with high gloss oil paint.
Columns: Turned structural fiberglass.
Newel posts: 5"x5" turned red cedar.
Ceiling: 4'x10' sheets of composite bead board.
Lattice: Mahogany stained Essex Green

Chicago modern exterior renovation featuring Prodema Rainscreen
Inspiration for a mid-sized modern white two-story wood flat roof remodel in Chicago
Inspiration for a mid-sized modern white two-story wood flat roof remodel in Chicago

Replaced customers existing treated decking with new Trex Transcend composite decking in Tiki Torch. The use of hidden fasteners creates a smooth and seamless deck surface that will last for years. Trex Transcend White Composite Railing with integrated LED lights completes the look.

Simple stair shape with deep treads and no nosing. Guardrail uses low iron clear glass with concealed fasteners.
Staircase - scandinavian staircase idea in Philadelphia
Staircase - scandinavian staircase idea in Philadelphia

Ipe decking installed over existing concrete slab covered patio. Double picture frame border and single step at access. Hidden fastening by way of toe-nailed stainless steel screws.

New Veranda decking with hidden fasteners and Veranda deck railing system
Inspiration for a modern deck remodel in Baltimore
Inspiration for a modern deck remodel in Baltimore

The owners of this beautiful historic farmhouse had been painstakingly restoring it bit by bit. One of the last items on their list was to create a wrap-around front porch to create a more distinct and obvious entrance to the front of their home.
Aside from the functional reasons for the new porch, our client also had very specific ideas for its design. She wanted to recreate her grandmother’s porch so that she could carry on the same wonderful traditions with her own grandchildren someday.
Key requirements for this front porch remodel included:
- Creating a seamless connection to the main house.
- A floorplan with areas for dining, reading, having coffee and playing games.
- Respecting and maintaining the historic details of the home and making sure the addition felt authentic.
Upon entering, you will notice the authentic real pine porch decking.
Real windows were used instead of three season porch windows which also have molding around them to match the existing home’s windows.
The left wing of the porch includes a dining area and a game and craft space.
Ceiling fans provide light and additional comfort in the summer months. Iron wall sconces supply additional lighting throughout.
Exposed rafters with hidden fasteners were used in the ceiling.
Handmade shiplap graces the walls.
On the left side of the front porch, a reading area enjoys plenty of natural light from the windows.
The new porch blends perfectly with the existing home much nicer front facade. There is a clear front entrance to the home, where previously guests weren’t sure where to enter.
We successfully created a place for the client to enjoy with her future grandchildren that’s filled with nostalgic nods to the memories she made with her own grandmother.
"We have had many people who asked us what changed on the house but did not know what we did. When we told them we put the porch on, all of them made the statement that they did not notice it was a new addition and fit into the house perfectly.”
– Homeowner

The Roof Duck 5V Crimp Metal Roofing Panel
Inspiration for a mid-sized coastal yellow two-story wood gable roof remodel in Jacksonville
Inspiration for a mid-sized coastal yellow two-story wood gable roof remodel in Jacksonville
39




