Example of a large mid-century modern u-shaped eat-in kitchen design in Los Angeles with an undermount sink, flat-panel cabinets, gray cabinets, metallic backsplash, stainless steel appliances and an island

Jeffrey Freeman Photography
Trendy light wood floor kitchen photo in Portland with light wood cabinets, brown backsplash, stainless steel appliances and an island

Kitchen
Example of a beach style painted wood floor and multicolored floor kitchen design in Los Angeles with a farmhouse sink, white cabinets, quartz countertops, ceramic backsplash, an island and colored appliances

Example of a trendy carpeted living room design in Omaha with a ribbon fireplace, a wall-mounted tv and beige walls

Bathroom - transitional turquoise tile bathroom idea in Philadelphia

Minimalist bathroom photo in Other

Private home office with blue accent wall and window with lots of natural light.
Home office - small coastal built-in desk brown floor home office idea in Charlotte with blue walls

Wet room design - freestanding tub and shower. Custom tub filler.
Bathroom - small rustic beige tile and porcelain tile porcelain tile, black floor and double-sink bathroom idea in Other with recessed-panel cabinets, dark wood cabinets, a bidet, white walls, an undermount sink, marble countertops, a hinged shower door, white countertops, a niche and a built-in vanity

A gorgeous kitchen with neutral colors in this home located in Promontory, Park City, Utah. Built by Cameo Homes Inc.
Kitchen - rustic kitchen idea in Salt Lake City

Architect: Andre Tchelistcheff Architects New York. NY Builder: Xhema of Greenwich CT Installer: TRM Enterprises Bridgehampton NY Back story. Northern has worked with both Xhema and TRM many tiles. We have worked with Andre before he branched out on his own. Originally Xhema’s contact was to replace the roof and repair the garage, which as some point had been made into an indoor swimming pool without adequate ventilation. The budget was about $8m and there were 20 drawings. By the time the job was 6 months old the scope of work has expanded to over $30m and over 200 drawings had been produced. Northern was contacted to visit the site and evaluate the existing roof. Although the house had been added to over the years the same tile was used but due to the location of the house the color of the tile varied considerably from the front to the back. Northern identified a large number of custom details which would require us to: 1) Match the existing Field tile in size, thickness (it was actually thicker at the butt and reduced to ½” where the tile is overlapped) , surface texture and the color. 2) Make tiles that are curved in their length to suit the curved rafter on the gabled dormers. 3) Make the curved tiles to suit the low slope octagonal tower. 4) Make the curved tiles and Arris style hips to suit the hipped dormers with the curved rafters. 5) Make the segmented tiles to suit the round turret. 6) Make the custom arris style hip tiles for the octagonal tower. 7) Make the custom Arris style hip to suit the different roof pitches as well as the varying splays at the eaves. 8) Make the custom pieces to suit the swept valleys Simon broke down each section of the roof. He indented all items for each section and agreed the measure etc with the installers. This ‘Project Bible’ became an invaluable tool for the installer, our tile makers and us. We shipped some samples from the original roof to Sahtas who replicated tall the details. I was visiting factory and delayed my return to the Saturday so that the tiles coming out of the kiln late Friday night could be wrapped and packed into newly purchase suit cases. I arrived home late Saturday evening and Simon picked me up Sunday afternoon and drove us down to Greenwich for an 8 am meeting with the clients. When we unpacked the tiles they were still warm and Hilfiger signed off on the color, although his wife suggested we make them a bit darker a ‘as he has a dreadful sense of color!’ We took Vincent Liot, owner of TRM to the factory twice so that he could oversee the prototyping of all the myriad custom pieces. This was an invaluable move as he pre-approved all the pieces before they were shipped. The installation was completed and everyone was very pleased with the final outcome. The Hilfiger’s estate manager told me that a group of friends who were staying the weekend after all the work was completed were heard to ask Mr. Hilfiger ‘I thought you were having a new roof’…to which he responded ‘we did but you can’t tell, which as the plan” …perfect! In refection this is probably the most complicated roof Northern has ever had the pleasure to supply. We learned a lot of very valuable lessons but in future when we are asked how did we do it we will answer ‘that is for us to know and for you to pay for!’

Architect: Andre Tchelistcheff Architects New York. NY Builder: Xhema of Greenwich CT Installer: TRM Enterprises Bridgehampton NY Back story. Northern has worked with both Xhema and TRM many tiles. We have worked with Andre before he branched out on his own. Originally Xhema’s contact was to replace the roof and repair the garage, which as some point had been made into an indoor swimming pool without adequate ventilation. The budget was about $8m and there were 20 drawings. By the time the job was 6 months old the scope of work has expanded to over $30m and over 200 drawings had been produced. Northern was contacted to visit the site and evaluate the existing roof. Although the house had been added to over the years the same tile was used but due to the location of the house the color of the tile varied considerably from the front to the back. Northern identified a large number of custom details which would require us to: 1) Match the existing Field tile in size, thickness (it was actually thicker at the butt and reduced to ½” where the tile is overlapped) , surface texture and the color. 2) Make tiles that are curved in their length to suit the curved rafter on the gabled dormers. 3) Make the curved tiles to suit the low slope octagonal tower. 4) Make the curved tiles and Arris style hips to suit the hipped dormers with the curved rafters. 5) Make the segmented tiles to suit the round turret. 6) Make the custom arris style hip tiles for the octagonal tower. 7) Make the custom Arris style hip to suit the different roof pitches as well as the varying splays at the eaves. 8) Make the custom pieces to suit the swept valleys Simon broke down each section of the roof. He indented all items for each section and agreed the measure etc with the installers. This ‘Project Bible’ became an invaluable tool for the installer, our tile makers and us. We shipped some samples from the original roof to Sahtas who replicated tall the details. I was visiting factory and delayed my return to the Saturday so that the tiles coming out of the kiln late Friday night could be wrapped and packed into newly purchase suit cases. I arrived home late Saturday evening and Simon picked me up Sunday afternoon and drove us down to Greenwich for an 8 am meeting with the clients. When we unpacked the tiles they were still warm and Hilfiger signed off on the color, although his wife suggested we make them a bit darker a ‘as he has a dreadful sense of color!’ We took Vincent Liot, owner of TRM to the factory twice so that he could oversee the prototyping of all the myriad custom pieces. This was an invaluable move as he pre-approved all the pieces before they were shipped. The installation was completed and everyone was very pleased with the final outcome. The Hilfiger’s estate manager told me that a group of friends who were staying the weekend after all the work was completed were heard to ask Mr. Hilfiger ‘I thought you were having a new roof’…to which he responded ‘we did but you can’t tell, which as the plan” …perfect! In refection this is probably the most complicated roof Northern has ever had the pleasure to supply. We learned a lot of very valuable lessons but in future when we are asked how did we do it we will answer ‘that is for us to know and for you to pay for!’

Architect: Andre Tchelistcheff Architects New York. NY Builder: Xhema of Greenwich CT Installer: TRM Enterprises Bridgehampton NY Back story. Northern has worked with both Xhema and TRM many tiles. We have worked with Andre before he branched out on his own. Originally Xhema’s contact was to replace the roof and repair the garage, which as some point had been made into an indoor swimming pool without adequate ventilation. The budget was about $8m and there were 20 drawings. By the time the job was 6 months old the scope of work has expanded to over $30m and over 200 drawings had been produced. Northern was contacted to visit the site and evaluate the existing roof. Although the house had been added to over the years the same tile was used but due to the location of the house the color of the tile varied considerably from the front to the back. Northern identified a large number of custom details which would require us to: 1) Match the existing Field tile in size, thickness (it was actually thicker at the butt and reduced to ½” where the tile is overlapped) , surface texture and the color. 2) Make tiles that are curved in their length to suit the curved rafter on the gabled dormers. 3) Make the curved tiles to suit the low slope octagonal tower. 4) Make the curved tiles and Arris style hips to suit the hipped dormers with the curved rafters. 5) Make the segmented tiles to suit the round turret. 6) Make the custom arris style hip tiles for the octagonal tower. 7) Make the custom Arris style hip to suit the different roof pitches as well as the varying splays at the eaves. 8) Make the custom pieces to suit the swept valleys Simon broke down each section of the roof. He indented all items for each section and agreed the measure etc with the installers. This ‘Project Bible’ became an invaluable tool for the installer, our tile makers and us. We shipped some samples from the original roof to Sahtas who replicated tall the details. I was visiting factory and delayed my return to the Saturday so that the tiles coming out of the kiln late Friday night could be wrapped and packed into newly purchase suit cases. I arrived home late Saturday evening and Simon picked me up Sunday afternoon and drove us down to Greenwich for an 8 am meeting with the clients. When we unpacked the tiles they were still warm and Hilfiger signed off on the color, although his wife suggested we make them a bit darker a ‘as he has a dreadful sense of color!’ We took Vincent Liot, owner of TRM to the factory twice so that he could oversee the prototyping of all the myriad custom pieces. This was an invaluable move as he pre-approved all the pieces before they were shipped. The installation was completed and everyone was very pleased with the final outcome. The Hilfiger’s estate manager told me that a group of friends who were staying the weekend after all the work was completed were heard to ask Mr. Hilfiger ‘I thought you were having a new roof’…to which he responded ‘we did but you can’t tell, which as the plan” …perfect! In refection this is probably the most complicated roof Northern has ever had the pleasure to supply. We learned a lot of very valuable lessons but in future when we are asked how did we do it we will answer ‘that is for us to know and for you to pay for!’

Architect: Andre Tchelistcheff Architects New York. NY Builder: Xhema of Greenwich CT Installer: TRM Enterprises Bridgehampton NY Back story. Northern has worked with both Xhema and TRM many tiles. We have worked with Andre before he branched out on his own. Originally Xhema’s contact was to replace the roof and repair the garage, which as some point had been made into an indoor swimming pool without adequate ventilation. The budget was about $8m and there were 20 drawings. By the time the job was 6 months old the scope of work has expanded to over $30m and over 200 drawings had been produced. Northern was contacted to visit the site and evaluate the existing roof. Although the house had been added to over the years the same tile was used but due to the location of the house the color of the tile varied considerably from the front to the back. Northern identified a large number of custom details which would require us to: 1) Match the existing Field tile in size, thickness (it was actually thicker at the butt and reduced to ½” where the tile is overlapped) , surface texture and the color. 2) Make tiles that are curved in their length to suit the curved rafter on the gabled dormers. 3) Make the curved tiles to suit the low slope octagonal tower. 4) Make the curved tiles and Arris style hips to suit the hipped dormers with the curved rafters. 5) Make the segmented tiles to suit the round turret. 6) Make the custom arris style hip tiles for the octagonal tower. 7) Make the custom Arris style hip to suit the different roof pitches as well as the varying splays at the eaves. 8) Make the custom pieces to suit the swept valleys Simon broke down each section of the roof. He indented all items for each section and agreed the measure etc with the installers. This ‘Project Bible’ became an invaluable tool for the installer, our tile makers and us. We shipped some samples from the original roof to Sahtas who replicated tall the details. I was visiting factory and delayed my return to the Saturday so that the tiles coming out of the kiln late Friday night could be wrapped and packed into newly purchase suit cases. I arrived home late Saturday evening and Simon picked me up Sunday afternoon and drove us down to Greenwich for an 8 am meeting with the clients. When we unpacked the tiles they were still warm and Hilfiger signed off on the color, although his wife suggested we make them a bit darker a ‘as he has a dreadful sense of color!’ We took Vincent Liot, owner of TRM to the factory twice so that he could oversee the prototyping of all the myriad custom pieces. This was an invaluable move as he pre-approved all the pieces before they were shipped. The installation was completed and everyone was very pleased with the final outcome. The Hilfiger’s estate manager told me that a group of friends who were staying the weekend after all the work was completed were heard to ask Mr. Hilfiger ‘I thought you were having a new roof’…to which he responded ‘we did but you can’t tell, which as the plan” …perfect! In refection this is probably the most complicated roof Northern has ever had the pleasure to supply. We learned a lot of very valuable lessons but in future when we are asked how did we do it we will answer ‘that is for us to know and for you to pay for!’

Architect: Andre Tchelistcheff Architects New York. NY Builder: Xhema of Greenwich CT Installer: TRM Enterprises Bridgehampton NY Back story. Northern has worked with both Xhema and TRM many tiles. We have worked with Andre before he branched out on his own. Originally Xhema’s contact was to replace the roof and repair the garage, which as some point had been made into an indoor swimming pool without adequate ventilation. The budget was about $8m and there were 20 drawings. By the time the job was 6 months old the scope of work has expanded to over $30m and over 200 drawings had been produced. Northern was contacted to visit the site and evaluate the existing roof. Although the house had been added to over the years the same tile was used but due to the location of the house the color of the tile varied considerably from the front to the back. Northern identified a large number of custom details which would require us to: 1) Match the existing Field tile in size, thickness (it was actually thicker at the butt and reduced to ½” where the tile is overlapped) , surface texture and the color. 2) Make tiles that are curved in their length to suit the curved rafter on the gabled dormers. 3) Make the curved tiles to suit the low slope octagonal tower. 4) Make the curved tiles and Arris style hips to suit the hipped dormers with the curved rafters. 5) Make the segmented tiles to suit the round turret. 6) Make the custom arris style hip tiles for the octagonal tower. 7) Make the custom Arris style hip to suit the different roof pitches as well as the varying splays at the eaves. 8) Make the custom pieces to suit the swept valleys Simon broke down each section of the roof. He indented all items for each section and agreed the measure etc with the installers. This ‘Project Bible’ became an invaluable tool for the installer, our tile makers and us. We shipped some samples from the original roof to Sahtas who replicated tall the details. I was visiting factory and delayed my return to the Saturday so that the tiles coming out of the kiln late Friday night could be wrapped and packed into newly purchase suit cases. I arrived home late Saturday evening and Simon picked me up Sunday afternoon and drove us down to Greenwich for an 8 am meeting with the clients. When we unpacked the tiles they were still warm and Hilfiger signed off on the color, although his wife suggested we make them a bit darker a ‘as he has a dreadful sense of color!’ We took Vincent Liot, owner of TRM to the factory twice so that he could oversee the prototyping of all the myriad custom pieces. This was an invaluable move as he pre-approved all the pieces before they were shipped. The installation was completed and everyone was very pleased with the final outcome. The Hilfiger’s estate manager told me that a group of friends who were staying the weekend after all the work was completed were heard to ask Mr. Hilfiger ‘I thought you were having a new roof’…to which he responded ‘we did but you can’t tell, which as the plan” …perfect! In refection this is probably the most complicated roof Northern has ever had the pleasure to supply. We learned a lot of very valuable lessons but in future when we are asked how did we do it we will answer ‘that is for us to know and for you to pay for!’

This was a difficult installation to be sure. The wainscoting goes up two stories and then the art had to be hung above that while being on a ladder on the stairs!! Had my eyes closed the whole time I was so nervous!! The photography had to be measured out beforehand and it took laying it out on my dining room floor the size of that wall before I ordered the pieces! I love the look and always are looking for something different to do to set these stairways apart. My crew didn't love me, but they loved the outcome and were troupers to do it at 7 pm at night after a 10 hour day!!

This cute cottage, one block from the beach, had not been updated in over 20 years. The homeowners finally decided that it was time to renovate after scrapping the idea of tearing the home down and starting over. Amazingly, they were able to give this house a fresh start with our input. We completed a full kitchen renovation and addition and updated 4 of their bathrooms. We added all new light fixtures, furniture, wallpaper, flooring, window treatments and tile. The mix of metals and wood brings a fresh vibe to the home. We loved working on this project and are so happy with the outcome! Photographed by: James Salomon