The Guemes Island cabin is designed with a SIPS roof and foundation built with ICF. The exterior walls are highly insulated to bring the home to a new passive house level of construction. The highly efficient exterior envelope of the home helps to reduce the amount of energy needed to heat and cool the home, thus creating a very comfortable environment in the home. + Architecture: H2D Architecture + Design www.h2darchitects.com + Interior Design: Karlee Coble Interiors + Built by: Carlisle Classic Homes + Photography: Chad Coleman Photography

HOL
Mid-sized arts and crafts garage photo in Portland Maine

The Twin Peaks Passive House + ADU was designed and built to remain resilient in the face of natural disasters. Fortunately, the same great building strategies and design that provide resilience also provide a home that is incredibly comfortable and healthy while also visually stunning. This home’s journey began with a desire to design and build a house that meets the rigorous standards of Passive House. Before beginning the design/ construction process, the homeowners had already spent countless hours researching ways to minimize their global climate change footprint. As with any Passive House, a large portion of this research was focused on building envelope design and construction. The wall assembly is combination of six inch Structurally Insulated Panels (SIPs) and 2x6 stick frame construction filled with blown in insulation. The roof assembly is a combination of twelve inch SIPs and 2x12 stick frame construction filled with batt insulation. The pairing of SIPs and traditional stick framing allowed for easy air sealing details and a continuous thermal break between the panels and the wall framing. Beyond the building envelope, a number of other high performance strategies were used in constructing this home and ADU such as: battery storage of solar energy, ground source heat pump technology, Heat Recovery Ventilation, LED lighting, and heat pump water heating technology. In addition to the time and energy spent on reaching Passivhaus Standards, thoughtful design and carefully chosen interior finishes coalesce at the Twin Peaks Passive House + ADU into stunning interiors with modern farmhouse appeal. The result is a graceful combination of innovation, durability, and aesthetics that will last for a century to come. Despite the requirements of adhering to some of the most rigorous environmental standards in construction today, the homeowners chose to certify both their main home and their ADU to Passive House Standards. From a meticulously designed building envelope that tested at 0.62 ACH50, to the extensive solar array/ battery bank combination that allows designated circuits to function, uninterrupted for at least 48 hours, the Twin Peaks Passive House has a long list of high performance features that contributed to the completion of this arduous certification process. The ADU was also designed and built with these high standards in mind. Both homes have the same wall and roof assembly ,an HRV, and a Passive House Certified window and doors package. While the main home includes a ground source heat pump that warms both the radiant floors and domestic hot water tank, the more compact ADU is heated with a mini-split ductless heat pump. The end result is a home and ADU built to last, both of which are a testament to owners’ commitment to lessen their impact on the environment.

Our client wanted a SIP built home and we incorporated this and many other energy and sustainability features into this home which was in the Sheboygan County Parade of Homes. Named "The Green Balanced Home", this project was all about creating practical and stunning living spaces that combined with sound environmental building materials and methods. By showcasing an assortment of leading-edge- green technologies, the Green Balanced Home was the talk of the Parade that year. In cooperation with our client, our methodology was: Start with the site: 1. Protected tree lines 2. Drought resistant vegetation 3. High proportion of natural, plantings versus higher maintenance lawn 4. Optimal home placement on lot for solar exposure 5. Narrower streets Build a high thermal envelope: 1. R-10 Gold Guard laminated EPS foam under basement, garage, and patio. 2. R-10 Gold Guard laminated EPS foam around exterior foundation walls. 3. R-10 ESP foam "shirt" around foundation 4. R-24 Structural Insulated panels (SIPs) for exterior walls, including garage 5. Sprayed foam in basement box sills and attic separation walls 6. R-15 garage door 7. R-60 blown cellulose attic insulation Add efficient heating, cooling, ventilation, and electric utilization elements: 1. High efficiency fireplace with auxiliary ducting 2. Pull-out exterior wood-loading drawer 3. Air-to-air heat pump 4. 95% efficient, ultra-quiet variable capacity furnace 5. 19 SEER air conditioner 6. Five zones with programmable thermostats 7. Heat reclamation from hot water usage 8. LED lighting 9. Skylights 10. Energy Star appliances 11. Prep for in-floor heating system 12. Prep for photovoltaic (PV) solar 13. Prep for solar hot water Incorporate water conservation: 1. Rain water recapture for toilet flushing and irrigation 2. Motion activated hot water circulation system 3. Power flush toilets 4. Dual flush toilets Create high indoor air quality: 1. HEPA and UV filters 2. Air-to-air exchanger 3. Ultra-quiet bathroom fans with moisture sensor activation Integrate sustainable, efficient materials: * Expanded polystyrene (ESP) foam that does not emit HCFC "greenhouse" gases * Oriented strand board (OSB) based siding, trim, and shutters * SIPs panels that contain ESP an OSB * Carpeting pads made from recycled materials * Stewardship-certified cabinet manufacturing * Job site recycling and reduce waste with SIPs

The Twin Peaks Passive House + ADU was designed and built to remain resilient in the face of natural disasters. Fortunately, the same great building strategies and design that provide resilience also provide a home that is incredibly comfortable and healthy while also visually stunning. This home’s journey began with a desire to design and build a house that meets the rigorous standards of Passive House. Before beginning the design/ construction process, the homeowners had already spent countless hours researching ways to minimize their global climate change footprint. As with any Passive House, a large portion of this research was focused on building envelope design and construction. The wall assembly is combination of six inch Structurally Insulated Panels (SIPs) and 2x6 stick frame construction filled with blown in insulation. The roof assembly is a combination of twelve inch SIPs and 2x12 stick frame construction filled with batt insulation. The pairing of SIPs and traditional stick framing allowed for easy air sealing details and a continuous thermal break between the panels and the wall framing. Beyond the building envelope, a number of other high performance strategies were used in constructing this home and ADU such as: battery storage of solar energy, ground source heat pump technology, Heat Recovery Ventilation, LED lighting, and heat pump water heating technology. In addition to the time and energy spent on reaching Passivhaus Standards, thoughtful design and carefully chosen interior finishes coalesce at the Twin Peaks Passive House + ADU into stunning interiors with modern farmhouse appeal. The result is a graceful combination of innovation, durability, and aesthetics that will last for a century to come. Despite the requirements of adhering to some of the most rigorous environmental standards in construction today, the homeowners chose to certify both their main home and their ADU to Passive House Standards. From a meticulously designed building envelope that tested at 0.62 ACH50, to the extensive solar array/ battery bank combination that allows designated circuits to function, uninterrupted for at least 48 hours, the Twin Peaks Passive House has a long list of high performance features that contributed to the completion of this arduous certification process. The ADU was also designed and built with these high standards in mind. Both homes have the same wall and roof assembly ,an HRV, and a Passive House Certified window and doors package. While the main home includes a ground source heat pump that warms both the radiant floors and domestic hot water tank, the more compact ADU is heated with a mini-split ductless heat pump. The end result is a home and ADU built to last, both of which are a testament to owners’ commitment to lessen their impact on the environment.

Small mountain style one-story concrete fiberboard exterior home photo in Tampa

Our client wanted a SIP built home and we incorporated this and many other energy and sustainability features into this home which was in the Sheboygan County Parade of Homes. Named "The Green Balanced Home", this project was all about creating practical and stunning living spaces that combined with sound environmental building materials and methods. By showcasing an assortment of leading-edge- green technologies, the Green Balanced Home was the talk of the Parade that year. In cooperation with our client, our methodology was: Start with the site: 1. Protected tree lines 2. Drought resistant vegetation 3. High proportion of natural, plantings versus higher maintenance lawn 4. Optimal home placement on lot for solar exposure 5. Narrower streets Build a high thermal envelope: 1. R-10 Gold Guard laminated EPS foam under basement, garage, and patio. 2. R-10 Gold Guard laminated EPS foam around exterior foundation walls. 3. R-10 ESP foam "shirt" around foundation 4. R-24 Structural Insulated panels (SIPs) for exterior walls, including garage 5. Sprayed foam in basement box sills and attic separation walls 6. R-15 garage door 7. R-60 blown cellulose attic insulation Add efficient heating, cooling, ventilation, and electric utilization elements: 1. High efficiency fireplace with auxiliary ducting 2. Pull-out exterior wood-loading drawer 3. Air-to-air heat pump 4. 95% efficient, ultra-quiet variable capacity furnace 5. 19 SEER air conditioner 6. Five zones with programmable thermostats 7. Heat reclamation from hot water usage 8. LED lighting 9. Skylights 10. Energy Star appliances 11. Prep for in-floor heating system 12. Prep for photovoltaic (PV) solar 13. Prep for solar hot water Incorporate water conservation: 1. Rain water recapture for toilet flushing and irrigation 2. Motion activated hot water circulation system 3. Power flush toilets 4. Dual flush toilets Create high indoor air quality: 1. HEPA and UV filters 2. Air-to-air exchanger 3. Ultra-quiet bathroom fans with moisture sensor activation Integrate sustainable, efficient materials: * Expanded polystyrene (ESP) foam that does not emit HCFC "greenhouse" gases * Oriented strand board (OSB) based siding, trim, and shutters * SIPs panels that contain ESP an OSB * Carpeting pads made from recycled materials * Stewardship-certified cabinet manufacturing * Job site recycling and reduce waste with SIPs

This was the first structural insulated panel building constructed by Craven Construction Inc. In a side by side comparison, this building was less that 2% more expensive than building it conventionally with studs and fiberglass insulation. It was intended for use as a bunk house studio with a workshop accessible on the other end for tool and supply storage. SIPs are not just energy efficient and durable, but also result in a quieter interior with superior sound deadening abilities.

Starry Sips & Scenes transformed a once bare, unfinished basement into a luxury multi-use retreat. This Minnesota basement renovation features a speakeasy-style bar and lounge with dark-stained wood, textured brick, brass accents, and gold wallpaper, paired with a star-lit home theater boasting ten leather recliners and surround sound. Additional spaces include a guest suite with bedroom and bath, a mirrored workout room, and an infrared sauna for ultimate wellness. Perfect for entertaining, relaxing, and working out in style, this basement blends high-end design with functional living.

Example of a transitional home bar design in Other

The owners of this wooded property on Whidbey Island came to H2D Architecture + Design with a vision to build a high-performance compact new home on the site. The goal of the design was to limit the impact and footprint on the site in order to maintain as many of the trees as possible. A select number of trees were removed to accommodate the new driveway, house and shed location, and a small yard area. The remainder of the site has been left untouched to remain a wooded sanctuary around the home. The home design was developed around a desire for creating only the minimum amount of space necessary for this family of two. The final design is a one-story home with approximately 1350 sf including two bedrooms, two bathrooms, laundry, storage, mechanical, and open living area. The open living area has a vaulted ceiling, wall of windows looking out to the yard, and connection directly out to a covered patio area. The structure of the home was designed to be built with SIPS (Structurally Insulated Panel System). Both the walls and roof were built with the SIPS panels creating a highly energy efficient building envelope. The cabinetry in the home was built by the homeowner. + Architecture: H2D Architecture + Design + Interior Design: H2D Architecture + Design www.h2darchitects.com + Green Consultantation and Built by: Zero Energy Homes and Clifton View Homes + Photography: Anastasiya Homes

This was the first structural insulated panel building constructed by Craven Construction Inc. In a side by side comparison, this building was less that 2% more expensive than building it conventionally with studs and fiberglass insulation. It was intended for use as a bunk house studio with a workshop accessible on the other end for tool and supply storage. SIPs are not just energy efficient and durable, but also result in a quieter interior with superior sound deadening abilities.

The Twin Peaks Passive House + ADU was designed and built to remain resilient in the face of natural disasters. Fortunately, the same great building strategies and design that provide resilience also provide a home that is incredibly comfortable and healthy while also visually stunning. This home’s journey began with a desire to design and build a house that meets the rigorous standards of Passive House. Before beginning the design/ construction process, the homeowners had already spent countless hours researching ways to minimize their global climate change footprint. As with any Passive House, a large portion of this research was focused on building envelope design and construction. The wall assembly is combination of six inch Structurally Insulated Panels (SIPs) and 2x6 stick frame construction filled with blown in insulation. The roof assembly is a combination of twelve inch SIPs and 2x12 stick frame construction filled with batt insulation. The pairing of SIPs and traditional stick framing allowed for easy air sealing details and a continuous thermal break between the panels and the wall framing. Beyond the building envelope, a number of other high performance strategies were used in constructing this home and ADU such as: battery storage of solar energy, ground source heat pump technology, Heat Recovery Ventilation, LED lighting, and heat pump water heating technology. In addition to the time and energy spent on reaching Passivhaus Standards, thoughtful design and carefully chosen interior finishes coalesce at the Twin Peaks Passive House + ADU into stunning interiors with modern farmhouse appeal. The result is a graceful combination of innovation, durability, and aesthetics that will last for a century to come. Despite the requirements of adhering to some of the most rigorous environmental standards in construction today, the homeowners chose to certify both their main home and their ADU to Passive House Standards. From a meticulously designed building envelope that tested at 0.62 ACH50, to the extensive solar array/ battery bank combination that allows designated circuits to function, uninterrupted for at least 48 hours, the Twin Peaks Passive House has a long list of high performance features that contributed to the completion of this arduous certification process. The ADU was also designed and built with these high standards in mind. Both homes have the same wall and roof assembly ,an HRV, and a Passive House Certified window and doors package. While the main home includes a ground source heat pump that warms both the radiant floors and domestic hot water tank, the more compact ADU is heated with a mini-split ductless heat pump. The end result is a home and ADU built to last, both of which are a testament to owners’ commitment to lessen their impact on the environment.

Imagine a lazy morning in this casually elegant kitchen, sipping your freshly brewed coffee as natural light pours through floor to ceiling windows. Then imagine being in this kitchen sipping your morning coffee and gazing out at the beautiful rolling landscape of one of New England’s prestigious golf clubs. Imagine . . . The owner of this beautiful contemporary kitchen with its idyllic setting imagined ! And her kitchen designer captured her imagination and brought this inspired space to life in both style and function. Columns of stainless steel are balanced by columns with the warmth of birch wood with just a hint of stain. On an adjacent wall one more wood column rises from floor to ceiling. A strong horizontal line of cabinetry seemingly intersects the vertical columns. While contemporary in design, the cabinetry in this kitchen found its beginnings with the Shakers and the designers of the Craftsman period. Increasing the size of the framing on the doors, accenting the cabinet shapes with square-edged trim and blocks of wood at varying depths, thinly slicing and randomly sizing the natural stone on the accent wall, and choosing oversized stainless steel handles definitively bring this kitchen forward in time. Recycled glass countertops in a soft, quiet color continue to help this kitchen live so harmoniously with its surroundings. As the day unfolds and the lazy morning turns into ambitious meal preparation, it is clear that this kitchen is a chef’s delight. The stainless steel columns incorporate double ovens, a microwave and a steam oven. Two wood columns house a refrigerator and a freezer. The separate wood column reveals pantry storage, and a TV is hidden behind a lift-up door. On the island with its clean, rectangular shape two dishwashers flank the sink. Imagine ! how much more pleasant the task of clean-up is when you overlook the family living space and vista beyond. In the cook center, a complement of drawers provides excellent storage for pots and pans, utensils, spices and herbs around the 5-burner cooktop. A powerful vent with a rear exhaust maintains the horizontal design of the space. And the freshly-brewed coffee in the morning ? It comes from a built-in coffee maker that’s just around the corner from the refrigerator. Along with a wine refrigerator, it creates a beverage and serving center between the kitchen and the dining room. The homeowner envisioned a kitchen that is as beautiful as its surroundings. Her kitchen designer wanted her kitchen to be as functional as it is beautiful. Both agree that this kitchen lives up to their expectations!

The Twin Peaks Passive House + ADU was designed and built to remain resilient in the face of natural disasters. Fortunately, the same great building strategies and design that provide resilience also provide a home that is incredibly comfortable and healthy while also visually stunning. This home’s journey began with a desire to design and build a house that meets the rigorous standards of Passive House. Before beginning the design/ construction process, the homeowners had already spent countless hours researching ways to minimize their global climate change footprint. As with any Passive House, a large portion of this research was focused on building envelope design and construction. The wall assembly is combination of six inch Structurally Insulated Panels (SIPs) and 2x6 stick frame construction filled with blown in insulation. The roof assembly is a combination of twelve inch SIPs and 2x12 stick frame construction filled with batt insulation. The pairing of SIPs and traditional stick framing allowed for easy air sealing details and a continuous thermal break between the panels and the wall framing. Beyond the building envelope, a number of other high performance strategies were used in constructing this home and ADU such as: battery storage of solar energy, ground source heat pump technology, Heat Recovery Ventilation, LED lighting, and heat pump water heating technology. In addition to the time and energy spent on reaching Passivhaus Standards, thoughtful design and carefully chosen interior finishes coalesce at the Twin Peaks Passive House + ADU into stunning interiors with modern farmhouse appeal. The result is a graceful combination of innovation, durability, and aesthetics that will last for a century to come. Despite the requirements of adhering to some of the most rigorous environmental standards in construction today, the homeowners chose to certify both their main home and their ADU to Passive House Standards. From a meticulously designed building envelope that tested at 0.62 ACH50, to the extensive solar array/ battery bank combination that allows designated circuits to function, uninterrupted for at least 48 hours, the Twin Peaks Passive House has a long list of high performance features that contributed to the completion of this arduous certification process. The ADU was also designed and built with these high standards in mind. Both homes have the same wall and roof assembly ,an HRV, and a Passive House Certified window and doors package. While the main home includes a ground source heat pump that warms both the radiant floors and domestic hot water tank, the more compact ADU is heated with a mini-split ductless heat pump. The end result is a home and ADU built to last, both of which are a testament to owners’ commitment to lessen their impact on the environment.

Krista Schuhwerck
Elegant detached garage photo in Minneapolis

Our client wanted a SIP built home and we incorporated this and many other energy and sustainability features into this home which was in the Sheboygan County Parade of Homes. Named "The Green Balanced Home", this project was all about creating practical and stunning living spaces that combined with sound environmental building materials and methods. By showcasing an assortment of leading-edge- green technologies, the Green Balanced Home was the talk of the Parade that year. In cooperation with our client, our methodology was: Start with the site: 1. Protected tree lines 2. Drought resistant vegetation 3. High proportion of natural, plantings versus higher maintenance lawn 4. Optimal home placement on lot for solar exposure 5. Narrower streets Build a high thermal envelope: 1. R-10 Gold Guard laminated EPS foam under basement, garage, and patio. 2. R-10 Gold Guard laminated EPS foam around exterior foundation walls. 3. R-10 ESP foam "shirt" around foundation 4. R-24 Structural Insulated panels (SIPs) for exterior walls, including garage 5. Sprayed foam in basement box sills and attic separation walls 6. R-15 garage door 7. R-60 blown cellulose attic insulation Add efficient heating, cooling, ventilation, and electric utilization elements: 1. High efficiency fireplace with auxiliary ducting 2. Pull-out exterior wood-loading drawer 3. Air-to-air heat pump 4. 95% efficient, ultra-quiet variable capacity furnace 5. 19 SEER air conditioner 6. Five zones with programmable thermostats 7. Heat reclamation from hot water usage 8. LED lighting 9. Skylights 10. Energy Star appliances 11. Prep for in-floor heating system 12. Prep for photovoltaic (PV) solar 13. Prep for solar hot water Incorporate water conservation: 1. Rain water recapture for toilet flushing and irrigation 2. Motion activated hot water circulation system 3. Power flush toilets 4. Dual flush toilets Create high indoor air quality: 1. HEPA and UV filters 2. Air-to-air exchanger 3. Ultra-quiet bathroom fans with moisture sensor activation Integrate sustainable, efficient materials: * Expanded polystyrene (ESP) foam that does not emit HCFC "greenhouse" gases * Oriented strand board (OSB) based siding, trim, and shutters * SIPs panels that contain ESP an OSB * Carpeting pads made from recycled materials * Stewardship-certified cabinet manufacturing * Job site recycling and reduce waste with SIPs

The owners of this wooded property on Whidbey Island came to H2D Architecture + Design with a vision to build a high-performance compact new home on the site. The goal of the design was to limit the impact and footprint on the site in order to maintain as many of the trees as possible. A select number of trees were removed to accommodate the new driveway, house and shed location, and a small yard area. The remainder of the site has been left untouched to remain a wooded sanctuary around the home. The home design was developed around a desire for creating only the minimum amount of space necessary for this family of two. The final design is a one-story home with approximately 1350 sf including two bedrooms, two bathrooms, laundry, storage, mechanical, and open living area. The open living area has a vaulted ceiling, wall of windows looking out to the yard, and connection directly out to a covered patio area. The structure of the home was designed to be built with SIPS (Structurally Insulated Panel System). Both the walls and roof were built with the SIPS panels creating a highly energy efficient building envelope. The cabinetry in the home was built by the homeowner. + Architecture: H2D Architecture + Design + Interior Design: H2D Architecture + Design www.h2darchitects.com + Green Consultantation and Built by: Zero Energy Homes and Clifton View Homes + Photography: Anastasiya Homes

Trendy patio photo in Los Angeles