Software
Houzz Logo Print
wookiemouse

Raised bed question - building on rock?

19 years ago

I just moved from an area that I used raised beds on because of poor soil, to an area that has NO soil. I am not kidding - the previous owners of the property trucked in about 20 tons of topsoil to get grass growing in the front yard. It took us 2 days to get a small swingset set up in the back because all our set stakes kept hitting rock! The landscape is composed of many large, flat rocks....some over 5' wide. There is some dirt visible, but you can't go down too far without hitting rock again. We have plenty of natural grasses and weeds in the area, so SOMETHING grows.

There is only one logical area on the property for a raised bed - an area that is relatively flat, gets enough sun and is out of the range of our septic sprinklers. I can easily get about 6-8 decent sized beds in there, which is great. I think I can get a good garden growing if I can make each bed 12-18" deep, since of course, this area is all rock. The only problem is, ALL of the beds I've seen constructed this deep require some sort of staking to the ground, and that simply isn't going to happen. I would end up with either skewed beds or odd shapes in order to avoid the rocks, and having done that in the past, I don't want to go there again.

What I need is some sort of bed that maintains its support from the outside of the bed to keep it stable and not shift - like a frame of sorts, but one that isn't anchored. I want to avoid railroad ties and treated lumber. I've done searches on this site and online, but have yet to find something that isn't anchored.

Any tips? Hubby would be pretty ticked off if I took over his front yard grass for my beds. :)

Stacy

Comments (8)

  • 19 years ago

    my parents have raised beds that are literally 4 1/2 feet tall so that my mother doesn't have to bend over, i wish i had a picture for you. she has two i think they are about 3 ft by 16. they used pressure treated 4X4s. i am with you, i don't want anything chemical treated anywhere near my veggies, using nontreated wood would rot way to fast, and would be hard to replace if you are building up.... but you may want to consider the composite 4X4s. they would last forever. theirs is so tall that it doesn't need to be steaked it holds itself up, although each layer must be secured to the next. then you fill it with gravel and then dirt, well that is what they did because it was so tall. my raised beds are made with 2x4s, non treated but they will be easy to replace if need be. my hubby wants to raise them another level, but i am very happy with what i have. my beds area not anchored and they are not going anywhere. are you on a hill? these are my beds early in the season
    {{gwi:74170}}
    and these are them now...
    {{gwi:74171}}
    {{gwi:74172}}

  • 19 years ago

    ...The only problem is, ALL of the beds I've seen constructed this deep require some sort of staking to the ground,

    Can you post photos? I ask because I don't find this to be true depending on what you use as sides, you could use cinder blocks for the sides and lay concrete for a level foundation for each of the beds.

  • 19 years ago

    12-18 inches deep ain't all that deep. If you're worried about them sliding, use interlocking wall stones like they sell at stores.

  • 19 years ago

    I'm not that concerned about sliding, as the area is flat. I'm more concerned about shifting blocks due to the weight of 12-18" (or more) of soil on the interior, combined with variables such as possible flooding rains drenching the beds and the occasional times I have to step in the beds for one reason or another (I try not to). I've seen problems arise where stacked CMUs (which was my first thought) would shift and require rebar as staking. I want to make sure that I have a system in place ahead of time, since staking after the beds are made is going to be near impossible (unless I'm really, really lucky and happened to pick spots that are pure soil, and in that case, I'm going to give up gardening and start playing the lottery!!!!).

    Sarah Lynn - love your beds. They look almost exactly like the garden I used to have - I used untreated 2x6s with pea rock paths. They last a good 7 years before they needed replacement due to rot.

    gamebird - hadn't thought of using the interlocking stones for retaining walls. I'll have to price that out. I know it will be grossly expensive, but if they will last 15-20 years then it may be worth it.

    Stacy

  • 19 years ago

    What I need is some sort of bed that maintains its support from the outside of the bed to keep it stable and not shift

    Here's what I would do i your situation if money were no object, I'd use recycled plastic lumber for the bottom and sides. It's a one time investment that will last longer than all of us.

    {{gwi:74173}}

    {{gwi:74174}}

    {{gwi:74176}}

    {{gwi:74178}}

    {{gwi:74180}}

    You can use a masonry bit to drill into the rock to anchor the bed.

  • 19 years ago

    Many of the recycled lumber companies have kits which contain connectors and many of them are flexible in size, etc.

  • 19 years ago

    Violet is right, You have the foundation for super beds. Just rent a hammer drill and get some 1/2 or 5/8 rebar. Drill the holes in the rock in a straight line, drop in the rebar and you will have all the support you could ever want for the sides of your beds. They sure as heck will not be going anywhere

  • 19 years ago

    here is an idea i found, i think i am going to use it myself for a pumpkin patch outside of my main garden...
    {{gwi:74182}}

Sponsored
Peabody Landscape Group
Average rating: 3.5 out of 5 stars8 Reviews
Franklin County's Reliable Landscape Design & Contracting