Need an appliance corner cabinet

11 years ago

I am looking for a retro fit appliance cabinet for my current red oak kitchen. I have standard raised panel doors (non-full overlay). Approximate size 21 w at front; 17.75 high counter to under existing cabinet; 35.5 w at back (along backsplash); 11.75 deep front to back; ideally 2 doors to match above cabinet open toward you then slide back along the angled side panels; or could go with a single door with open toward you then slide back along top of cabinet. I am having these cabinets redone to a bright white using the NHance process so just need it made in red oak material. Is this something you can/would do? Contact - Marge Collins (630) 781-5505 or collins20@comcast.net I can send a picture and can also provide more exact dimensions by 1/15/15 as I am currently out of town. Thanks so much!

Bright California Traditional · More Info

Sort by:Oldest

Comments (3)

PRO
MJK Homes, Inc.
11 years ago
Thank you for the inquiry, but I typically only do whole house remodels or new homes. Best of luck to you.
Margaret Collins
Original Author
11 years ago
I appreciate your taking time to respond. The white kitchen I saw on Houzz had two of these corner counter top cabinets and is exactly what I am looking for but have been unable to get anywhere. I have attached two pictures so you could see how perfect your product would be for my space. I would have my carpenter install so really only need you to fabricate. This cabinet, I think is comprised of front door(s); door opening track to fit; 2 side panels; partial back (plywood)?; light panel top (plywood)?; no floor.
I would really appreciate it if you could/would contact me directly at (630) 781-5505 if you would reconsider. If not would you be willing to share you design specs with me so that I may use these to have a local contractor fabricate this cabinet for me?
I was very impressed with your Houzz kitchen design and the quality of your work is quite evident.

Thank You,
Margaret Collins
collins20@comcast.net
(630) 781-5505
PRO
MJK Homes, Inc.
11 years ago
All of our work is custom made locally and not shipped out of state. Any custom cabinet company in your area should be able to fabricate what it is you are looking to achieve. Simply show them a picture and they can build it to match. Good luck!