Software
Houzz Logo Print
dancestranger

info about fockea edulis/potential problem?

19 years ago

I have no idea how to take care of this plant. I bought it with no instructions and have had trouble finding information about it.

My friend had one in college, and i thought it was the coolest thing I had ever seen. When I got mine I realized that hers was somewhat unhealthy. Hers would grow vines with small leaves, and then it would suddenly lose all of its leaves and then it would eventually revive.

When I bought mine (from the same place she bought hers) it had one vine with darker green leaves that were huge. I've had it for almost 2 months now and it has started another vine, but all of the leaves are small, some of them have turned yellow and fallen off. I've tried exposing it to more sunlight, which seems to be helping the new leaves survive, but the leaves are folding.

The original vine has lost 4 leaves, but has been doing better with the increased sunlight. I'm confused, as they look like leaves from different plants.

Any ideas for care instructions/what i'm doing wrong?

thanks!

Comments (8)

  • 19 years ago

    Yep take it out of the pot and make sure the roots are healthy, change the pot with a new one plastic would be fine. This species loves to be crowded and I trim it back in the fall, it will leaf out in Spring. Make sure the think root is healthy and plant it back into barely damp soil, if the roots are not okay be sure to write back for more instruction. The leaves should not be big, the more twisted the root is the better it is, expose part of the root on top of the soil. How about sending us a picture, would you be able to do that for us. This group is terrific, they will all help you. Don't over water, that will drop leaves. Don't overpot. Keep in part shade or filtered light. Check out the roots, and make sure you give is clean sterilized fresh soil. Norma

    Did not proof read.

  • 19 years ago

    {{gwi:590574}}

    this is a basic picture, with the container that its in

    {{gwi:590576}}

    this is a closer shot of the leaves that are folding, and the vine that is dropping a lot of leaves

    {{gwi:590578}}

    closer shot of the caud. thing (caudiciform or caudex? from what i have esen, i'm guessing that caudiciform is the type of plant and the caudex is this thing?) Any idea how old this plant is?

    {{gwi:590580}}

    the underworkings

    {{gwi:590582}}

    closer shot of the main guy - it looks ok to me, but i'm not sure about the white roots, they seem kind of dry for roots(??) Also, the pot that this plant is in does not have a hole in the bottom, and when i took the plant out of the pot the big root had started to go into the rocks that i added for drainage.

    When I repotted the plant when I first bought it I couldn't even see this large root, so its definitely grown some. When I tried to remove it from its original plastic container, it was so tight/dry i had to cut it to remove the plant. There was appx 1/3 of an inch of space to fill in when I put the plant into this container.

    It doesnt seem too unhealthy, but maybe I just dont know what I'm doing, and it seems that it could be happier.

    Thanks for the response and thanks in advance for any advice :)

  • 19 years ago

    First - Thanks for the pix and additional info.
    Second - Nice specimen! appears to be 1-2 yrs.
    Third - Locate a drill and ceramic bit.
    And yes, this plant is a caudiform and that is its caudex.

    Your roots look to be in good shape, though the soil appears to be standard peat-based fare. Test its sharpness: when it is damp (as it appears now), take a handful and tighten your fist. Does it stay "formed" when you open your hand or does it try to fall apart? You want it to be loose. When you water does the water stand on top of the soil for several minutes or does it drain straight thru? Does it drain down the sides of the top or trickle thru the soil?
    I'm going to provide you with a link to another post. It is regarding a C. ovata but I think it may help you too. I know some will be tired of hearing me sound this warning but I am convinced that the majority of common succulent problems can be traced back to the soil/drainage issue.

    Please note: Putting pebbles at the base of your pots will not resolve drainage needs, you have only shortened your pot and created a pool of stagnant water. A single layer of stones *above a drain hole* may help but it is unnecessary if your soil is sharp - the drain hole is not. I could give you the long and short of it or you can get full info by googling "perched water table".

    I know, I know...did you ever hear about the boy who went to his father and asked a question? Without looking down the Dad said "Son, go ask your Mother". The boy's face crumpled up and he says "Nevermind, I didn't want to know THAT much."

    Here is a link that might be useful: I can't stop the jade tree leaf drop!

  • 19 years ago

    when somebody told me that putting rocks in the bottom of a pot without a hole and that should work, i thought it didnt make too much sense, but i went with it.. i mean thats a nice lookin pot.

    I dont have access to a drill immediately.. is there a more primitive way to make a hole? Time isnt an issue, I just graduated college and I dont begin work until the middle of August :). Otherwise I should probably be able to get to a drill by the weekend.

    I tried squeezing the soil and it didnt stay formed, but I have a feeling that if those little styrofoam balls (they could be something else, I'm not sure i know basically nothing about soil mixtures) werent there then it would stay formed.

    My mom has some schultz professional cactus and succulent potting mix, should i remove all of the orginal soil and replace it with this?

    Also, would it be better to temporarily remove the "drainage" rocks at the bottom until I can find a better fix.... or perhaps I should just find a plastic container in the garage somewhere, until i can fix the pretty pot. I was actually looking earlier for something else, I dont recall anything that would be the right size, it all seems a little bit too large. (sorry I'm so stream of thought lol)

    {{gwi:590584}}

    this is another picture I forgot to post. I'm assuming its minor, but I could be wrong. On edge of the soil there's small hair like roots that just come off when I touch them, but they dont seem to be the main parts.. and there isnt a large amount or anything soo..

    Also, thanks for the jade link, my friend just gave me a small jade cutting that was in a soil mix that i believe was peat, so i put it in the c & s mix my mom had, and it did get to see that the roots had started also so thats a bonus :)

  • 19 years ago

    Your plant is quite attractive in this pot; if you want to use it and can get a drill and ceramic bit over the weekend, I would sit the whole project aside in bright diffuse light and dry conditions and wait. Your plant is holding water, it will be fine until Sat. Just set it back in the pot and don't water.

    I don't know of another way to drill a hole in ceramic. What I've done in the past is: set my pot on the grass (not concrete) and put just enough water down inside it to "just" cover the bottom (helps keep the bit cool) and drill. Others may have better methods for doing this.

    "but I have a feeling that if those little styrofoam balls...werent there then it would stay formed."
    Yes, well that shows the importance of the perlite. I would still wash it all off and start over. Schultz (I think, I could be wrong, I don't use pre-made mixes) still has peat in it but at least your mix would be uniform, that's important. If you have a nursery nearby stop in and ask for a good soil with no peat. They will certainly have it. If it doesn't contain enough perlite, add more (but *I* think you would be happier with haydite or decomposed granite so ask about those while at the nursery).

    Don't worry about the fine roots, they will quickly regenerate. Snip any of those off if they look unhealthy.

    The soil/peat info on the jade link is, IMHO, solid info for all cactus and succulents, fockea and c. ovata alike. I hope you found it helpful. When planting up your jade, did you clean the nursery soil off the roots? If not, why not go ahead and do both plants at once, using your new soil mix? As my ole granny would say, "best do it right the first time so you can enjoy it instead of worrying each day about what you didn't do". GL -

    Jo

  • 19 years ago

    I hope all of you copy off the reply, just great, thank you, The white roots look like new growth to me. Make sure you drill that hole. Take off the dead roots. Norma

  • 19 years ago

    thank you so much for all the information! the shultz does have peat in it. it says "ingredients: the product is regionally formulated from 28%-38% reed-sedge peat, sphagnum peat moss, perlite, and washed sand."

    it also says for repotting mature plants: "for jungle cacti and succulents, add some additional Schultz Peat Moss."

    so its just bogus advice to get people to buy more of their product..? lol

    I already put the jade in the schultz c & s potting mix, unfortunately. Its in in a one inch tiny pot, so it didnt take very long. I did take the advice from the other post to rinse off the original soil, Should I wait a while before I switch it up again? (after i get a proper mix, hopefully by the weekend)

    thanks again for all the help :)
    if i manage to go shopping for this soil mix i'll probably have more questions of course, but who knows what i'll come up with. i'll defintely keep you updated.

  • 19 years ago

    "I hope all of you copy off the reply, just great, thank you.... Norma"

    From you, Norma, I consider that high praise indeed.
    I know your long affiliation w/HBG and your advice is gold.

    DS -
    **IMO**, yes it is bogus...or just plain crap! The only ingredients you have listed here that I would put in my succulents is the perlite - scrapping all peats and sands.

    Route#1: Go to HD or WM and find a bag of basic potting soil, with no peat or slow-release fertilizers added to the mix. Buy a size you need for the two plants. Now go get a bag of Perlite (*not Vermiculite*), that matches your bag of soil in volume (not weight).

    **Mix well the two bags together and you have a basic, sharp succulent soil**

    Note: If they also sell Decomposed Granite and if you can afford it, consider using that instead of perlite - or perhaps a 50/50 mix of DG and vermiculite.

    Route#2: Go to a nursery and ask for an organic potting mix containing no peat, get the size ya need. I, personally, use 50/50 haydite and organic potting soil. Ask for haydite, if they don't have it, ask for DG. Someone is sure to show you the different 'stones' available for sharpening your soil. Mix 50/50 by volume and you're good to go!

    Your C. ovata should be fine until you have your new mix, but I'd go ahead and do both plants at the same time.

    Don't stress over finding the right soil. A basic potting soil can be bought at WM for about $2/bag. A bag of perlite w/be a bit more. These two items will get you growing on the proper road...you can get "fancier" as you learn

    DS - I really hope this gets your plants on the road to good growing and longevity! Let me know when you're ready to talk ferts!
    Jo

Sponsored
Miller Woodworks
Average rating: 5 out of 5 stars23 Reviews
Franklin County's Trusted Custom Cabinetry Solutions